xBhp

Yamaha RD350 crank

Fri, 27 Nov 2009 04:04:19 -0500

by: prashanth_benz

Description: I had this crank removed from my bike..the bearings seem to be fine..the rods are also fine with lil or no play..one rod is original Yamaha while the other one seems to be a TKR. I have listed a few other parts in another advert..if you buy all the parts there I can give this off as a package..the package includes Yamaha R5 350 imported cylinder (stock and almost new) Yamaha RD350 LT cylinder (sleeved but stock and japanese spec) Yamaha RD350 LT heads Yamaha RD350 Crank I can give the entire package for 32k..let me know ..cheers

Yamaha RD350 Cylinders

Fri, 27 Nov 2009 03:58:45 -0500

by: prashanth_benz

Description: For sale are these parts.. Yamaha R5 350 cylinders : These are imported from the USA and are from the R5 350..These will fit on the RD350 as per my mechs words but you will need the R5 pistons which I do not have..but its an easy find on ebay or hvccycle.com...the bores are almost brand new in condition and stock size.they have hardly been used. final price: 12k Yamaha RD350 LT: These are sleeved LT cylinders..the sleeve job seems to be done by a professional with good matching ports..these are original early model barrel with the inscription "RD350" and not "RAJDOOT 350" on them..so these are pretty rare Id assume..they are stock size. Final price: 12k Yamaha RD350LT heads: these are matching pair of heads for the above mentioned cylinders.final price:4k if you buy it with the cylinders il give the entire set for 15k

Yamaha RD350 USA cylinder..Crankshaft..Heads..pistons et all

Mon, 13 Jul 2009 07:34:59 -0400

by: prashanth_benz

Description: Up for sale are the following items 1) Yamaha RD350 cylinders..Imported from the USA..Stock size HT cylinders..unsleeved..this is the 39Bhp version 2)Yamaha RD350 LT cylinders: these are the Indian made LT cylinders..sleeved and std size..these are the first batch of LT cylinders..marked "347cc" instead of the "rajdoot 347cc"..these still have the exhaust port limiting studs so remove them and you'l have a HT barrel..these have been beadblasted and powder coated and look new..I will throw in a pair of used pistons if I manage to find them with this pair..!! 3)Yamaha RD350 Crankshaft : this was removed from a running bike..bearings are in decent condition and the crank itself is in good condition and within tight tolenrences..you might wanna change the con-rods but as I said these came of a decent running bike..so its ur call 4)Yamaha RD350 LT heads: These are LT heads removed from a running bike...excellent condition..freshly sandblasted and powdercoated..looks mint!! 5)Genuine Yamaha RD350 ART pistons: These pistons are NOS pistons that I bought off of ebay USA..these were manufactured in 1973 and are still in their original packaging. 6)Yamaha R5 350 cylinders: These are std sized and unsleeved R5 350 cylinders..the R5 was the predecessor to the RD350..the R5 cylinder will fit on the RD..you will need to buy R5 pistons which I do not have but they are easy to find..These have an excellent top end power because of their straight port induction..These were imported from the USA and will make 36Bhp.0 Please give your best offer for each item...the Highest offer above my reserve takes it....I prefer payment via paypal...cheers

Yamaha RD350 Cylinders Imported USA Stock Size

Mon, 02 Feb 2009 04:36:07 -0500

by: prashanth_benz

Description: These are cylinders from an RD350 ..I got these from the US..these are original bore i,e 64mm and have been freshly bead blasted and cleaned. The internals are clean...ive been offered 15k for this pair..I just thought il run this advert here and see how the response is...just to let you know a good standard sleeve job in India would cost about 10k..or atleast in Chennai it cost that much..and mind since these are from the US spec RD/R5 they produce about 36BHp lovely pair..let me know your best offer..PM me here....I prefer payment via paypal...will tell my paypal ID to the highest offer and we will take it from there..thanks and cheers..

Tectrac exhaust

Fri, 09 Jan 2009 09:38:09 -0500

by: prashanth_benz

Description: Hey guys...im selling my Tectrac exhaust that was on my Pulsar 180 Dtsi for about a year now...of which the bike was used only for about 4 months....cos the rest of the time i was not home n the bike was jus cleaned n polished regularly...so ur pretty much getting a 4 month old exhaust....n if ur looking for a tectrac pipe im sure u already know about the quality of the pipe.. This is a complete exhaust...i,e...a tuned length bend pipe and a free flow exhaust canister.all chromed. The length of the pipe is tuned for an overall spread of power with a little more punch in the mid range..!! overall ul be able to feel the power mainly in and after the midrange..!! i do recommend jetting...i was running a k&N n this exhaust and was using a 125 main jet from the Zma.The exhaust is located in Chennai...id prefer local buyers as there are no transport hassles..but if there is someone interested in the exhaust lemme know...cheers!!