Thread: [Ownership Thread]: Pulsar 220 DTS-Fi
View Single Post
Old 11-25-2008, 06:43 PM   #732 (permalink)
theslayer
Titles aren't for me.
 
Join Date: Sep 2008
Location: Chennai
Posts: 227
Default

Quote:
Originally Posted by Aryan View Post
@slayer, Praful: How often does the 'air pressure' of the nitrox dampers need to be checked? And how is it done; I mean how does the service center guys do it. I ask because I have zilch idea about it..
Page 26, Periodic Maintenance and Lubrication Chart, Item No. 36 Check gas pressure 7.0 + 0.5 Kg/cm^2, to be done every 10k kms

I figured the only component of the bike involving 'Gas' was the Nitrox rear suspension, so there, one part of your query answered.

I used to think that Nitrox literally meant the rear shocks used Nitrogen for damping, but then the device they use to refill the Nitrox shocks is nothing but a simple pressure gauge cum mechanical air pump kind of thing. You'll notice the star screw to the rear of the gas chamber in the shocks, they remove it, insert the device and pump air into it for something like 110-120 psi ( not sure about the units psi or something else ) . Second part of your query answered.

Damn, I answered Aryan's queries! It's usually the other way round. Am I honoured


Quote:
Originally Posted by prafultripathy View Post
The NoX pressure needs to be checked every 10K kms, mine was at 0psi too @ 10K.

PS: This aint the most technologically advanced bike in the market...
Which is why i mentioned "during its launch"! There was only the Glamour with Fi during that time i believe.
__________________
Riot Engine |Norton WD 16H | BSA C11G |Enfield Fury
Thanks to Mr. Muthukumar, B&QRest Garage for these acquaintances!



Last edited by theslayer; 03-03-2009 at 10:59 AM.
theslayer is offline   Reply With Quote