View Single Post
Old 07-01-2009, 08:49 PM   #5 (permalink)
ron_7933
roAdbl/-\z3r
 
ron_7933's Avatar
 
Join Date: Jan 2009
Location: Halfway between the road n da starz :D
Posts: 109
Default

Actually i made the first post from the office, so i wasnt able to type much.

ok so some of the things are:
1.The engine oil used to get burnt. Got it checked and ultimately had to get the piston changed. Since then the bike doesn't have a good pickup.

2. Once the induction coil and the magnets broke and the bike didnt start at all. Although the coil was changed, the section produces a noise as if something is being ground inside.

3. He needs to get the clutch plates replaced often. Like i had got my clutch plates replaced @ 30k and my odo reads 40k, and we had got them changed at the same time. and since then he has got his plates changed twice, not on his own will but on being adviced by the mechanic @ castrol bike zone, wazirpur.

4. When he starts the bike using self, it produces a sharp screeching sound for a fraction of a second.

So these are some of the things he told me. Pardon me for not using technical terms.. coz i myself dont know them!

Although even i am not sure how these things are associated, but any help would be appreciated.
ron_7933 is offline   Reply With Quote