sajjt

Hi Abhi, back here with another topic, Bixeons in projectors its there but the diff is projector has a solenoid sheild to make the beam H/L. Bulb will be sitting as like any other single beam bulb. Manufacturers used to say H4 projectors and some say bixenon h4, but inside the projector the sheild is acting as the H/L funciton.

Animeher, its always good for trying the projector in bikes as it makes a hell of difference in visibility and stray glares etc. I am HID on my Pulsar but am not satisfied with the beam spread as the stock reflector is designed for halogen lamps not fit for HIDs. Even am also in the look out for the projectors for the retrofit. Any way go for the solenoid funtion projector else , like as you said earlier you will be losing the any one of the beam in effect.

I have seen some pics but they all are fitted with angle eyes within the stock reflector which in reality spoils the charm of the angel eyes by the stock reflector glares. You cant even figure out there is an angel eye but rather think its just like an LED show off. So you need to either mask the stock reflector with some acrylic sheet or remove the reflector fully to bring out the real angel eye show off.

Anyway you are going to proceed for a junkyard job, hope this will help to procure the lens

Projector Lamp + HID for my ikon - Team-BHP