Originally Posted by iamvik

If you can do some DIY repairs, try to remove the rubber manifold and check for cracks inside and outside. Squeeze the manifold a bit if required. When you replace it, tighten the clamps properly. If you can do this much on your own, you should be able to replace the manifold with a new one, making sure it's a genuine HH part.

Sorry, I mistook your location to be TVM. You should post a msg on the Kerala thread or karizma thread and ask for recommendations on mechanics near to you. As for Blr, I recently returned to Blr after a few years away so I don't know any good mechs here. You could also ask this on the karizma thread.

good luck!