Originally Posted by BlueBlitz

@Sravan:

like i said, put the bike on main stand, start it nad look at the oil level indicator. (right bottom of bike) As soon as you start the bike the level should dip in some time, due to oil being pulled in Cooler. If the level is not changing and not moving with opening up of throttle, it means oil is not getting pulled.

Then you need to take it to Service guys and stand with them an ask them to remove the air left in cooler connector. If they know about it they will do it themselves. In case they are not able to do it, just look for a screw connecting the cooler with black think pipes. There will be a screw where the iron pipes from tubes jon the cooler, The mechanic will understand then. You must unscrew the nut and let air pass (with bike started) and after few seconds oil will pump out and
quickly tighten it back. The bike will start pulling the oil. IF above things are not working, its good idea to ask the service guys to clean the pipes connecting the cooler with engine. That can help in easy flow of oil through it. hope this helps...

Cheers...