INSTALLED PROJECTORs on MY UNICORN - Page 3 - xBhp.com : The Global Indian Biking Community

prashanth lobo · 10-18-2009, 07:09 PM

@ Shreeni: Okay.... So u going to use a different HID for high and low beam... What is the third projector going to have?? Sorry if i missed it in the thread... Why not a single projector with the HID which have both high low beam?? Sorry just curious to know... Is it better like this??

Shreeni0403 · 10-18-2009, 08:00 PM

Well sorry guys, i will be removing the setup as i am not happy with setup.

Will update later

abhijeet080808 · 10-18-2009, 10:25 PM

^^ Main prob is focussing.. used a D2S HID n see.. else use a 100/90 yaar.. its good enough!

xionite · 10-18-2009, 10:45 PM

Quote:

Originally Posted by Shreeni0403

HAD NO SPACE TO MOUNT 2 PROJECTORS i.e ONE ABOVE THE OTHER AS IN P220. HEIGHT IS INSUFFICIENT. AND I HAD 3 PROJECTORS SO DIDN'T WANT TO WASTE THEM

Quote:

Originally Posted by Shreeni0403

Well sorry guys, i will be removing the setup as i am not happy with setup.

Will update later

wat? y exactly? not enough spread without the HIDs???

rahuldevnath · 10-18-2009, 11:21 PM

Quote:

Originally Posted by Shreeni0403

HAD NO SPACE TO MOUNT 2 PROJECTORS i.e ONE ABOVE THE OTHER AS IN P220. HEIGHT IS INSUFFICIENT. AND I HAD 3 PROJECTORS SO DIDN'T WANT TO WASTE THEM

SURE BRO, WE SHALL MEET BTW HOW WAS YOUR EXAM

TO BE FRANK AM NOT HAPPY AS OF NOW (DUE TO POOR BULB). SPREAD IS EXCELLENT BUT LIGHT PRODUCED BY BULB IS NOT SUFFICIENT TO SPREAD THAT MUCH AREA.

Exams went on fine.

Why do'nt you try with stacked up projectors, but diagonally.. sometime non-symetrical stuff looks good too!

Nio · 10-18-2009, 11:27 PM

man thats the insanest headlamp mod I've seen on a bike

how does your battery support that demonic 100w in benz projector!!
Which battery are you using and please specify the procedure involved

winzeee · 10-19-2009, 12:49 AM

It sure doesnt look good IMO

.But man u pulled it off dude great
U should have fitted two of em like diagonally Or like this

o
O

Shreeni0403 · 10-19-2009, 08:30 AM

Quote:

Originally Posted by abhijeet080808

^^ Main prob is focussing.. used a D2S HID n see.. else use a 100/90 yaar.. its good enough!

Bro, focusing is not the problem. High beam is the problem. It wont go to the distance i wanted it to go. Instead it will show SKY

Quote:

Originally Posted by xionite

wat? y exactly? not enough spread without the HIDs???

Spread is excellent but am not happy for high beam. In low beam it can show you the whole world.

Quote:

Originally Posted by Nio

man thats the insanest headlamp mod I've seen on a bike

how does your battery support that demonic 100w in benz projector!!
Which battery are you using and please specify the procedure involved

Does it mean worst mod ever

.
Battery can withstand anything if the rpm is above 7k

. Am planning for rewinding and i just wanted to try out, nothing more.

Quote:

Originally Posted by winzeee

It sure doesnt look good IMO

.But man u pulled it off dude great
U should have fitted two of em like diagonally Or like this

o
O

I have clearly mentioned the reason why i didn't put 1 above the other. There is no enough height to put in the way you have mentioned.

dcs · 10-19-2009, 10:14 AM

I dont care what others say to this Mod Job but in my Honest opinion, this is one of the cleanest and the most apt Mod Job....far far better than some Paint or stickers.

I have been longing to get one for my Zma too, but shortage of time dint let me go to fetch the projectors.

Just out of curiosity, does the projectors have the provision of adjustment...as we have in our stock head lights, so that we can adjust it to out needs. also, these three projectors with the black tape.... mate that is some real @$$...kudos!

sajjt · 10-19-2009, 10:24 AM

Quote:

Originally Posted by Shreeni0403

Bro, focusing is not the problem. High beam is the problem. It wont go to the distance i wanted it to go. Instead it will show SKY

Sreeni, first of all, let me congratulate for the nice mod, hats off to u dear. As I said earlier, u need to position the lenses before mounting thats why u are facing this high beam problem I hope. Its not an easy job to positioning the lenses with a non standard reflector but there are lots of tips available in the net, just follow it. One more, u should'nt've removed the sheild from the Merc's lens, u could've used it as H/L simulaneously without having any beam issues upto this much at least. If u still have it try that also. How did u managed to fix a H1 to a D2S socket? Glue job there also? It will not last as the 100W Halo will desipitate a good amount of heat to burn your bulb gluing or even sealed beam glass too. Stick to a 35W HID after the proper positioning of these lense, or prepare for the wild greets from the oncoming vehicles. So take care its a more focussed light than in a conventional reflector. I changed the sealed beam 3 times when I opted for the 100/90 halo, in your case it could be worse.

Spread is excellent but am not happy for high beam. In low beam it can show you the whole world.

Go for the Osram NB H3, u know its performance before this also, If u've little more money, go for HID 35w worth for projectors.

Does it mean worst mod ever

.
Battery can withstand anything if the rpm is above 7k

. Am planning for rewinding and i just wanted to try out, nothing more.

U'll've no other choice left than coil rewinding and full DC conversion with the high cap RR. It will take care of ur needs hopefully. After converting to DC with new RR, my bike supports, one 35W HID, 2X55W H3, rest of all stock console, tail, number plates etc. without any struggle. Previously I was getting only 45 Mins max now its extended to more than 3 hours, as I've tested to that only, but I am quite sure about that it will take care of it.

ANYWAYS NICE JOB, I can see that u have a lot of design talents.

10-18-2009, 08:00 PM	#22 (permalink)
Shreeni0403 Biking In Veins Join Date: Nov 2008 Location: Mysore/Bangalore Posts: 1,365	Well sorry guys, i will be removing the setup as i am not happy with setup. Will update later __________________ ●▬╡‹¦[«-̲̅■̲̅■̲̅■̲̅ ̲̅S̲̅ђ̲̅я̲̅є̲̅є̲̅ ̲̅■̲̅■̲̅■̲̅-»]¦›╞▬●

10-18-2009, 10:25 PM	#23 (permalink)
abhijeet080808 ElectroniX! Join Date: Sep 2008 Location: BLR/GHY/MAS Posts: 2,375	^^ Main prob is focussing.. used a D2S HID n see.. else use a 100/90 yaar.. its good enough! __________________ Your biking tells a lot about the person you are!

10-19-2009, 12:49 AM	#27 (permalink)
winzeee Senior Member Join Date: May 2008 Location: Cybertron Posts: 684	It sure doesnt look good IMO .But man u pulled it off dude great U should have fitted two of em like diagonally Or like this o O __________________

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
installation of pulsar classic headlamp with angel lamps and projectors in UG3	themadrussian	Help Me!	11	04-06-2011 10:01 PM
After market projectors	avinrichards	Help Me!	44	10-19-2009 03:08 PM
Unicorn help!!!	abhivg	Help Me!	4	06-17-2009 09:30 PM
HELP:Can projector lights can be installed in apche efi/rtr	haxor	Help Me!	12	05-30-2009 08:26 AM
What to do with my Unicorn	roshanvallappillil	Help Me!	19	05-03-2009 06:19 AM

10-18-2009, 07:09 PM	#21 (permalink)
prashanth lobo Senior Member Join Date: Mar 2009 Location: Bangalore Posts: 430	@ Shreeni: Okay.... So u going to use a different HID for high and low beam... What is the third projector going to have?? Sorry if i missed it in the thread... Why not a single projector with the HID which have both high low beam?? Sorry just curious to know... Is it better like this??

10-18-2009, 11:27 PM	#26 (permalink)
Nio Senior Member Join Date: Dec 2008 Location: Capital, God's Own Country Posts: 1,548	man thats the insanest headlamp mod I've seen on a bike how does your battery support that demonic 100w in benz projector!! Which battery are you using and please specify the procedure involved

10-19-2009, 10:14 AM	#29 (permalink)
dcs Banned Join Date: Sep 2008 Location: Free-da-Bad earlier, Currently in Saddi Dilli! Posts: 919	I dont care what others say to this Mod Job but in my Honest opinion, this is one of the cleanest and the most apt Mod Job....far far better than some Paint or stickers. I have been longing to get one for my Zma too, but shortage of time dint let me go to fetch the projectors. Just out of curiosity, does the projectors have the provision of adjustment...as we have in our stock head lights, so that we can adjust it to out needs. also, these three projectors with the black tape.... mate that is some real @$$...kudos!

Register Now for FREE!
Are you registered on xBhp yet? If not, do so now and start participating to be able to share photos and experiences with other members. It will also enable to you have a chance to be a part of xBhp contests and roadtrips in the future! Username: Password: Confirm Password: E-Mail: Confirm E-Mail: Birthday: Image Verification I agree to forum rules