kinshuk.arya

Hello folks,

I have been riding the FZ from the past one and a half years. the bike has clocked around 11.5k km. Now i want to learn and do its 12k service on my own. As I love bikes I think it should not be very hard to service a bike.

But the problem is i dont know what things are to be done for the service and I dont want to give the bike to the svc as they are more prone to damage something or the other whenever given a bike for servicing.

Could anybody please elaborate what are the things that should be done for the service and if possible how to do it, and the tools required for them.

Thanks in advance.

__________________
RIP VINU.... May you get the bike and ride of your dreams in heaven.....

My Gallery: http://www.500px.com/kinshuk_arya
My Dream: 168mph + 998cc + 150bhp

Fz headlight with p220 PROJECTOR setup for sale. PM me for details. for pics (http://www.facebook.com/media/set/?s...0533996&type=1)

MG

Query Approved

A lot of help is sitting in the DIY threads. Please go through them.

Edit: Moved your thread to "DIY section"

__________________
Join xBhp On



My photography page: Gourab Das Photography

kinshuk.arya

hi, thnx for the approval..... i have already gone through all the threads and am capable of doing many of the things in the service requirements....

although i need help in some specific sections such as:

2-Spark plug cleaning and resetting the gap.
3-Valve clearance check (If necessary)
5-Checking cracks or damage on fuel hose.
8-Checking front and rear braking system.
9-Clutch functioning check.
10-Wheel run out check .
11-Checking wheel bearings.
12-Checking steering looseness.
17-Air pressure check-Front and rear Tire.
18-Lubricate clutch and throttle cable.
19-Lubricate all pivot points/center stand/side stand.

__________________
RIP VINU.... May you get the bike and ride of your dreams in heaven.....

My Gallery: http://www.500px.com/kinshuk_arya
My Dream: 168mph + 998cc + 150bhp

Fz headlight with p220 PROJECTOR setup for sale. PM me for details. for pics (http://www.facebook.com/media/set/?s...0533996&type=1)

kinshuk.arya

i have gone through the threads of the DIY section.... but i want help i n some specific sections such as....

3-Valve clearance check (If necessary)
8-Checking front and rear braking system.
9-Clutch functioning check.
10-Wheel run out check .
11-Checking wheel bearings.
12-Checking steering looseness.
13-Front and rear shock absorber operation check
18-Lubricate clutch and throttle cable.

__________________
RIP VINU.... May you get the bike and ride of your dreams in heaven.....

My Gallery: http://www.500px.com/kinshuk_arya
My Dream: 168mph + 998cc + 150bhp

Fz headlight with p220 PROJECTOR setup for sale. PM me for details. for pics (http://www.facebook.com/media/set/?s...0533996&type=1)