Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like minded biker friends. We have one common religion - Bikeism.

Castrol Power 1

Accelerate quick but brake easy.

Our Partners



User Tag List

Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
Like Tree19Likes

Thread: DIY - Pulsar 200NS Engine Oil change

  1. #11
    Addicted rossyamaha46's Avatar
    Join Date
    Dec 2008
    Location
    Goa,India
    Posts
    64
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Pulsar 200NS Engine Oil and Oil Filter Change(Better Version).

    Quote Originally Posted by thegeneboy View Post
    Thanks for the detailed writeup and crisp pictures as well...
    Could you please elaborate on cleaning the oil strainer.. I mean how did you clean it? Just by shaking it profusely or using a cloth and cleaning or using kerosene/diesel and letting it dry well before fixing the strainer back???
    Hey! Glad you liked it.

    About cleaning the magnetic strainer,I used a toothbrush and a magnet(to remove the metal filings). I did not use Kerosene or Diesel,it is not required as the strainer doesn't get that dirty. Be careful while you used the toothbrush though,you don't want to spoil your strainer,be gentle.
    Last edited by rossyamaha46; 05-27-2013 at 08:16 PM.
    Life is not measured by the number of breaths you take...,
    But by the moments that take your breath away...

  2. #12
    Rusted Pinaki's Avatar
    Join Date
    May 2010
    Location
    Calcutta
    Posts
    2,012
    Mentioned
    91 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Pulsar 200NS Engine Oil and Oil Filter Change(Better Version).

    i) clean out the oil filter housing well .

    ii) soak the new filter in fresh engine oil for sometime before fitting .

  3. #13
    Rusted sunilyo's Avatar
    Join Date
    Oct 2011
    Location
    New Delhi
    Posts
    488
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Pulsar 200NS Engine Oil and Oil Filter Change(Better Version).

    Also check if the Oil Filter 'O' Ring is ok if not you also need to replace that. Costs around 10 bucks or so.

    As Pinaki said, clean the oil filter chamber with a clean cloth.

    After pouring in 1.2 liters of oil, start the engine and idle for around 20-30 seconds so that the new oil reaches every corner of the engine and then wait for a few minutes and check the oil level through oil level window it should be between the min - max marker if not then top up by pouring in more oil till the required level is achieved.

    If a centre main stand is installed the better or else ask a friend to hold your bike straight while you inspect the oil level.

  4. #14
    Rookie
    Join Date
    Jun 2013
    Location
    Mumbai
    Posts
    47
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default Re: DIY - Pulsar 200NS Engine Oil change

    Hey,
    thnks for DIY.
    I know this question is silly, but i wanted to ask where should i find the 18mm and 8 mm spanners??

  5. #15
    Addicted lnagr's Avatar
    Join Date
    Jun 2010
    Location
    Chandigarh, India
    Posts
    111
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default Re: DIY - Pulsar 200NS Engine Oil change

    Thanks for this awesume DIY, i might have missed the Magnetic Strainer if not for this thread.

    Now my question is at what level oil should be in Oil Inspection window? with 1.2 litres of Oil,it didnt even reached middle of the Window. had to pour 200ml more so that it reaches half
    200NS 13K kms / RE500 3k kms / Electra 20k kms / P150 80K Kms / i10 10k Kms

  6. #16
    Addicted shanthasoroobanr's Avatar
    Join Date
    Jan 2017
    Location
    Avinashi
    Posts
    62
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: DIY - Pulsar 200NS Engine Oil change

    Where can i buy the oil filters?

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Engine change ZMA
    By riderjet_999 in forum Help Me!
    Replies: 1
    Last Post: 12-06-2012, 02:14 PM
  2. Pulsar 200NS
    By deathstorm in forum Help Me!
    Replies: 0
    Last Post: 07-31-2012, 12:16 PM
  3. Engine oil change or Top up?
    By Bubbly in forum Help Me!
    Replies: 33
    Last Post: 12-02-2011, 02:10 AM
  4. How to change engine oil of bajaj pulsar ??
    By neal_wreakz86 in forum Help Me!
    Replies: 1
    Last Post: 12-29-2010, 03:29 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •