Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like minded biker friends. We have one common religion - Bikeism.

Castrol Power 1

Tubeless tyres are better than tubed ones.

Our Partners

User Tag List

Results 1 to 2 of 2
Like Tree8Likes
  • 5 Post By accuengineer
  • 3 Post By The Monk

Thread: changing chain sprocket in Royal Enfield CL350

  1. #1
    Passionate D.I.Y Guy accuengineer's Avatar
    Join Date
    Aug 2012
    Chennai, Tamil Nadu, India
    12 Post(s)
    0 Thread(s)

    Default changing chain sprocket in Royal Enfield CL350


    My bully has completed 20,000 kms and the chain has been extended to the maximum. Did not want to remove the chain link and continue using which could be dangerous.

    Name:  IMG_20161217_084816259.jpg
Views: 1453
Size:  103.9 KB

    Now it is time to start another DIY. So brought all the spares required and the DIY begins.

    Tools required.

    1. Spanners/sockets 8,10,12,13, 14,19,23 & 25mm
    2. Tubular box spanner 46 mm
    3. Nose plyer
    4. Nylon hammer

    Spares required

    1. Chain sprocket set Rs. 1750
    2. Liquid gun oil Rs. 825
    3. Damper Rubber Bush Rs. 60 set of 4 nos (If required)
    4. NBC Bearing 6005LH or 6005Z Rs.165 (If required)
    5. Dust seal Rs. 20 (If required)
    6. Right side packing Rs. 90
    7. Breather tube - Rs. 75 (If required)


    1. First drain all the engine oil. - refer
    2. Remove the right rear foot rest using a 17 mm spanner

    Name:  IMG_20161218_130557090.jpg
Views: 1451
Size:  110.3 KB

    3. Remove the 2 nuts in the front of the silencer using 10 mm sockets.

    Name:  IMG_20161218_125315004_HDR.jpg
Views: 1390
Size:  109.0 KB

    4. Remove the bolt of the exhaust using 12 mm socket and remove the full silencer.

    Name:  IMG_20161218_124954521.jpg
Views: 1383
Size:  106.5 KB

    5. Remove the right foot rest by using a 17mm socket.

    Name:  IMG_20161218_090410730.jpg
Views: 1381
Size:  111.0 KB

    6. Remove the kicker by using a 14mm and 12mm socket/spanner.

    Name:  IMG_20161218_085254070.jpg
Views: 1365
Size:  112.1 KB

    7. Remove the nut in the rear brake using a 13 mm socket/spanner. Remove the spring attached to the rear danger light switch and then remove the brake lever by using a 10mm socket.

    Name:  IMG_20161218_084538499.jpg
Views: 1338
Size:  109.3 KB

    8. Remove the cover of the resonator by removing the 10mm bolt and gentle pulling the top side and the bottom side they will be press fitted. (note: Not required but my hands are big so not able to access the sockets from the alternator.)

    Name:  IMG_20161218_083231170.jpg
Views: 1340
Size:  110.4 KB

    Name:  IMG_20161218_083118148.jpg
Views: 1349
Size:  105.6 KB

    9. Now remove the Rubber retainer holding the resonator.

    Name:  IMG_20161218_082702309.jpg
Views: 1338
Size:  105.5 KB

    10. Loosen the 2 screws of the rubber bellow and remove the resonator.

    Name:  IMG_20161218_082815251.jpg
Views: 1375
Size:  109.2 KB

    Name:  IMG_20161218_082931406.jpg
Views: 1326
Size:  103.3 KB

    11. Remove the resonator holding clamp using 10mm socket.

    Name:  IMG_20161218_081725888.jpg
Views: 1319
Size:  108.7 KB

    12. Now disconnect the 2 sockets which are from the alternator.

    Name:  IMG_20161218_081334691.jpg
Views: 1306
Size:  111.8 KB

    Name:  IMG_20161218_081410555.jpg
Views: 1315
Size:  103.0 KB

    13. Remove the breather tube. Replace if found cracked or damaged.

    Name:  IMG_20161218_081030788.jpg
Views: 1302
Size:  111.6 KB

    Name:  IMG_20161218_081051702.jpg
Views: 1289
Size:  105.7 KB

    14. Remove the nut from the rear axle using a 23mm socket/spanner and remove the axle by gentle tapping it with a nylon hammer.
    15. Remove the rear wheel.

    Name:  IMG_20161218_115548896.jpg
Views: 1332
Size:  112.7 KB

    16. Remove the rubber dampers. Replace if cracked or damaged

    Name:  IMG_20161218_115451026.jpg
Views: 1291
Size:  107.3 KB

    17. Remove the chain lock using a nose plyer and remove the master link. Remove the chain.

    Name:  IMG_20161218_113050942.jpg
Views: 1276
Size:  102.1 KB

    18. Remove the rear sprocket assembly holding nut by using a 17mm spanner.
    19. Remove the rear sprocket assembly Nut by using a 25mm spanner.

    Name:  IMG_20161217_084817246.jpg
Views: 1262
Size:  103.9 KB

    18. Remove the rear sprocket assembly.

    Name:  IMG_20161218_105722895.jpg
Views: 1288
Size:  112.2 KB

    19. Remove the 11 bolts using a 8mm socket from the right side casing

    Name:  IMG_20161217_165830890.jpg
Views: 1282
Size:  109.7 KB

    Name:  IMG_20161217_165852668.jpg
Views: 1255
Size:  106.2 KB

    20. Gentle pull the ride side casing and remove it.

    Name:  IMG_20161217_161205075_HDR.jpg
Views: 1256
Size:  116.9 KB

    21. Using a flat screw driver and nylon hammer open nut locker of the front sprocket. Sorry don't have the opening photo. Use a cutting plyer to close the locker after replacing with the new sprocket.

    Name:  IMG_20161217_155656202.jpg
Views: 1386
Size:  112.9 KB

    22. Put the bike in first gear so that the sprocket does not rotate. Now by using a 46 mm tubular box spanner remove the nut

    Name:  IMG_20161217_155358270.jpg
Views: 1244
Size:  111.3 KB

    23. Now remove the front sprocket from the shaft.

    Name:  IMG_20161217_155032123.jpg
Views: 1252
Size:  108.8 KB

    Name:  IMG_20161217_155142264.jpg
Views: 1243
Size:  108.9 KB

    Name:  IMG_20161217_155249978.jpg
Views: 1347
Size:  108.1 KB

    24. Clean using diesel/kerosene. Warning Care should be taken that dust and other debris do not fall into the casing.

    25. Install the ball bearing and the dust cover in the new rear sprocket.

    Name:  IMG_20161218_094157668.jpg
Views: 1373
Size:  115.1 KB

    Name:  IMG_20161218_094205042.jpg
Views: 1272
Size:  110.9 KB

    Name:  IMG_20161218_103803896.jpg
Views: 1272
Size:  111.8 KB

    26. Assemble everything back the sequence we removed them.
    27. Fill the new oil through the filling hole.
    28. Check if the chain slackness is between 20.00 to 30.00mm.
    29. Check if all the bolts and nut are tightened properly and then take a test ride.

    Disclaimer: Please take necessary precautions while working and I am not responsible if anything goes wrong.
    Attached Images Attached Images  

    Smile at everyone you meet and make someone happy.

    Its better to sweat than bleed!! "AGATT "

  2. #2
    Moderator The Monk's Avatar
    Join Date
    Apr 2011
    Gurgaon/ Kanpur
    411 Post(s)
    3 Thread(s)

    Default Re: changing chain sprocket in Royal Enfield CL350

    DIY Approved

    Thanks for the DIY
    Biking is not about what you have between your legs, its all about how well you use it!!!!!!!

    Give your details here if you want to help your fellow xBhpian stranded in your city

    Touring Blog: Cycling in Mongolia!

Similar Threads

  1. Disc brake pad changing in Cl350 and other similar bikes
    By accuengineer in forum Do it Yourself!
    Replies: 2
    Last Post: 04-12-2016, 07:33 AM
  2. Replies: 3
    Last Post: 03-03-2016, 02:51 PM
  3. Changing of Handle bar in Royal Enfield classic 350
    By accuengineer in forum Do it Yourself!
    Replies: 1
    Last Post: 12-14-2015, 07:43 PM
  4. My next chain-sprocket set.
    By neevarp16 in forum Help Me!
    Replies: 23
    Last Post: 08-31-2015, 11:18 AM
  5. ---DIY for changing sprocket bearing---
    By petrolhead_chn in forum Do it Yourself!
    Replies: 8
    Last Post: 07-05-2014, 08:58 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts