i have finally solved my problem -
http://www.xbhp.com/talkies/universa...tml#post759680

ya ground is proper.

Is the rr o/p ground wire conected to the ground properly? Else check with a different batt.

stator coil output is ok, i checked it. the wiring and connections are also ok.

what to do?

the rr unit output is not more- it is less at 9.3 volts

Also, disconnect the RR and check the coil voltages directly. It should go over 90V AC at 6k rpm or so.

The RR unit is not charging. Your batt voltage never increases even with higher rpms?

Get the wiring checked from coil to RR and from RR to battery.

need urgent help, today i connected a new ape rr to my bike (P150 UG3). before connecting the new ape rr, my battery was discharged and was showing 10.5 volts. on connecting ape rr and starting the engine it started to show 9.3 volts. even after riding for 1.5 hours it still is 9.3 volts.? help me.

ok, thanx buddy

I got values fluctuating from 10V to 20V approx across the rpm ranges.. anyways since these are spike voltages and not constant, the multimeter too matters..

18-20 volts? sajjt says it is in the range of 0-5 volts? i am asking open ckt voltage?