Parth

sure buddy any time..u can call me on +91 9930908898

I use a Large - They seem to be a little loose (normally all others will be tight / snug fit) - But this gloves is value for the money you pay (900 rs) - I have used about 6000 kilometers and the thread is pealing off - This happened with Cramsters as well though.

You can use this as a secondary glove - Not a primary touring glove.

I received in 4 days upon ordering! Seems like a nice every day gloves

My debit card did not work. try a Credit card. Indian card works. So u pay it and ask him to get it from USA!

My Order is Shipped through USPS today. Hopefully would receive it by next month

I did not - But Ordered a Medium + large (And got 10% Discount) - 50.98$ shipped to India. Google or send email to them and see if it works!

I saw them spread across the International Kawa / Ninja forums. Add the product to cart and then apply the code GL50 or GL80 and you will get a 20$ discount.

I'm planning to order them directly to India - will let you know how it goes.. And it takes 20 days to be delivered. So if it goes through well, you can order it with your friend in USA!

I think that was digislayer.. you dont need frames for these projectors.. there are mounted in the bulb hole itself!

I used silicone sealant.. but I am planning to replace it with "butyl tape" - this is what is originally there in the h/l.

Yes. The hard part is to open the h/l assembly into 2. That needs a heat gun and some effort. You have to close it back using some adhesive.

2 bixenon proj + 2 chinese H1 hids = around 8k. Low beam is wide and superb, Hi could have been a bit narrow and deep. All in all, a good setup.