xbhp2011

Hi..,
Only one Headlamp works in normal mode..,
Swicth on Highbeam and check...Right Lamp works on High Beam or Pass..,
In general nly the Left Lamp works.., you can ask SVC to make both lamps work all time though..,
You can't even start the Bike if the Fuse blown..so dnt worry on that
And regarding the heat.., am not sure.., try to check at the SVC
Even my Radiator fan was not kicking in till i took my bike to SVC to get it checked...now its working Fine..,

Dnt get worried..., Ride safe

Hi.. Sorry for the late reply, I was out on a trip.

Stick to what the manual says for the running in process. The a new engine will feel a bit harsh for the first few 1500-3000KMs ... It will start getting smoother from then on if run in well. Don't be worried about the vibes for now, unless they are too prominent. The vibes may be for a long list on reasons for as small as loose panels. Inspect footpegs, panels and the engine mounts for the play and fix them if need be.
Relax and stick to the manual for now.

At 5K on the odo switch to a better oil like the Motul 300v and notice the positive change in the machine

Always remember to never start ripping the bike from cold starts. Leave it on idle for about a minute before you start riding the bike after a long halt!

Hi manikiran .. thanks for ur advice and will surely follow it

Hello Bro!
Even i bought my new R15 last week and its 6th day of my ride on it..,
I do shift the gears at 3.5 - 4.5 RPM but still i get a good speed of 60 - 70 kmph on 4th gear..,
The restriction was not to cross 5k RPM so think its better to use it that way and intermediately Giving a speed bursts above 60 for a few mins..,
There are different Opinions on running bike in Break-in or Run-in Period..,
My understand is never stress the engine..but should make it run at high speeds but not continuously..,
Hope this helps..
and last word..Rides are not as 'Sensitive' as we think they are..,