Share Your Creativity (Bike Modification) - Page 35 - xBhp.com : The Global Indian Biking Community

honda_vings · 05-21-2009, 09:14 PM

Get a silver paint job done
Dat wud luk better n'll prevent corrosion
reply 4 d person "who wanted to get brake levers buffed"

insane_x97 · 05-21-2009, 10:36 PM

adding airfilter in series will hamper airflow,try uni(far better) or k&n...

blackprince · 05-22-2009, 12:50 AM

Quote:

Originally Posted by roshanvallappillil

hi,which pulsar's handle have you fixed in your unicorn.When I asked a workshop-wala about fitting a pulsar 200 or 220 handle to be fitted,he said that if you fit those handles,then the bike's overall handl;ing will be lost and the main thing is that as the petrol tank is huge and since the pulsar's handle is short,it will crash with the tank.need your advice.

it was p180 handle bar. need small modification. if u r from kolkata i can give u the proper address otherwise u can call me at 9831619800

honda_vings · 05-23-2009, 07:00 PM

i dn't thnk air flow will b hampered
bt that's nt my question
does providing air scoops and delivering the air through dem to the air filter unit increases air flow at high speeds ?
m gonna implement it for d matter of luks bt if its possible to boost top end performance as well ,den plz tell me technically proper way to do that.
thnx in advance

neville_kc · 05-29-2009, 03:22 PM

Quote:

Originally Posted by Thunder

Hi where can i get the FZ Headlamp......and how much does it costs.....

Dunno about Chennai... but in Mumbai its available everywhere on Balaram Street near Grant Road...

r@m · 05-30-2009, 09:53 PM

can any one please give a decent workshop in bangalore to get the bike painted
address,shop name and phone no# would be helpful.
i need to get my pulsar repainted...
thanks

insane_x97 · 05-30-2009, 11:02 PM

Quote:

Originally Posted by honda_vings

i dn't thnk air flow will b hampered
bt that's nt my question
does providing air scoops and delivering the air through dem to the air filter unit increases air flow at high speeds ?
m gonna implement it for d matter of luks bt if its possible to boost top end performance as well ,den plz tell me technically proper way to do that.
thnx in advance

sorry for late reply,air scoops wont make any significant change,
as far performance mods concern, unicorn is potent enough to try some serious mods, you can start with cbz extreme cams, straight fit, better air flow,
even the engine can be pushed to 200cc.
search the forum for related posts. do it properly and you will have a p200, zma killer in your hands.......

dream horse · 05-31-2009, 09:32 AM

hi,

is the xtreme cam shafts are really have higher lifts compared to unicorns.

there is no proper details related to 200 cc & their pistons.

pls can any body tell the dia of a piston to make a 200cc engine.

sijusid · 05-31-2009, 01:05 PM

i am back with some more cosmetic modifications on my bike.
1. black powder coat of alloy
2. radium strips on rims
3. changed headlight to round one

i had done this mod around 2 months back but only got time now to post it.

honda_vings · 05-31-2009, 01:29 PM

Quote:

Originally Posted by sijusid

i am back with some more cosmetic modifications on my bike.
1. black powder coat of alloy
2. radium strips on rims
3. changed headlight to round one

i had done this mod around 2 months back but only got time now to post it.

Quote:

Originally Posted by insane_x97

sorry for late reply,air scoops wont make any significant change,
as far performance mods concern, unicorn is potent enough to try some serious mods, you can start with cbz extreme cams, straight fit, better air flow,
even the engine can be pushed to 200cc.
search the forum for related posts. do it properly and you will have a p200, zma killer in your hands.......

M nt ready to do dose xtreme mods 2 my bike since it has done mere 13000 kms .
N black prince cud u plz tell me what was d price of ur alloys set(front+rear) , my local dealer is charging 7000 Rs. for a set and dat 2 on order with 50% advance.(i knw he's a poor dealer)
And does powder coating provide better finish den d stock finish of d engine paint and will it be as durable as the stock engine paint
if no den hw cn i get my engine and chain case coated(or painted) black)

05-21-2009, 09:14 PM	#341 (permalink)
honda_vings Senior Member Join Date: May 2009 Posts: 187	Get a silver paint job done Dat wud luk better n'll prevent corrosion reply 4 d person "who wanted to get brake levers buffed" __________________ Biking can be an alternative to sex but unfortunately there is no alternative to bikes ! ! Last edited by honda_vings; 05-21-2009 at 09:26 PM.

05-23-2009, 07:00 PM	#344 (permalink)
honda_vings Senior Member Join Date: May 2009 Posts: 187	i dn't thnk air flow will b hampered bt that's nt my question does providing air scoops and delivering the air through dem to the air filter unit increases air flow at high speeds ? m gonna implement it for d matter of luks bt if its possible to boost top end performance as well ,den plz tell me technically proper way to do that. thnx in advance __________________ Biking can be an alternative to sex but unfortunately there is no alternative to bikes ! !

05-31-2009, 01:05 PM	#349 (permalink)
sijusid Junior Member Join Date: Sep 2008 Location: Panvel, Mumbai Posts: 2	Some Additional Mods on my Bike i am back with some more cosmetic modifications on my bike. 1. black powder coat of alloy 2. radium strips on rims 3. changed headlight to round one i had done this mod around 2 months back but only got time now to post it. Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread:

05-21-2009, 10:36 PM	#342 (permalink)
insane_x97 ਰਾਮਗੜੀਆ Join Date: Sep 2008 Posts: 204	adding airfilter in series will hamper airflow,try uni(far better) or k&n...

05-30-2009, 09:53 PM	#346 (permalink)
r@m Junior Member Join Date: Mar 2009 Posts: 28	can any one please give a decent workshop in bangalore to get the bike painted address,shop name and phone no# would be helpful. i need to get my pulsar repainted... thanks

05-31-2009, 09:32 AM	#348 (permalink)
dream horse Senior Member Join Date: Oct 2008 Posts: 117	hi, is the xtreme cam shafts are really have higher lifts compared to unicorns. there is no proper details related to 200 cc & their pistons. pls can any body tell the dia of a piston to make a 200cc engine.

Register Now for FREE!
Are you registered on xBhp yet? If not, do so now and start participating to be able to share photos and experiences with other members. It will also enable to you have a chance to be a part of xBhp contests and roadtrips in the future! Username: Password: Confirm Password: E-Mail: Confirm E-Mail: Birthday: Image Verification I agree to forum rules