Pulsar's digital console/ self-check purpose. - xBhp.com : The Global Indian Biking Community

Samuel · 04-10-2009, 10:16 PM

Yo guys just wanted to know whats the purpose of self check thing that the digital pulsar shows when u turn on the ignition? And will it be possible to make our non digital pulsars do self checks like the digitals?

Just imagine how cool it will look just like a sports

bike.Both the needles turning all the way and coming back. What do u think people i need your reponse on this

Will it be possible?

Aryan · 04-12-2009, 09:10 PM

Topic Approved.

svjhonda · 04-12-2009, 09:15 PM

The self check is supposed to check the entire electircal loop for anu malfunctions. On sportbikes it also checks all the sensors for any problems. So the Pulsar's digital meter muct be checking only the electrical loop, of the LCD display.

For a non digital speedo'ed Pulsar, I dont know. It will be a lot of work to make thw needles do a sweep. Also might fiddle with their calibrations and give you erratic readings in the long run. So your best bet would be fitting the LCD meter on your bike. I know it can be done. I had read it here on xbhp itself.

Samuel · 04-13-2009, 01:11 PM

Thnx SVJ i was just curious to know will it possible to make our non digitals do the self check thing. As for fitting the didgital console will it fit perfectly on the non digitals and wht will be the overall cost for it? Wil it put any load on the battery or the current set of wiring?

Thunder · 04-13-2009, 01:22 PM

Ive seen many V1 pulsars having the Digi Consoles of V3 pulsars....

They need a new set of wiring to be done - it can be done with the bajaj Guys itself - else - contact the Speedometer repair centres in your area .....

The Self Check is been implemented in all the Digi Console Bikes.....They check all the Wiring and Sensors status......

Analog Consoles doesnt have thie option ..... ...... .....

insanebiker · 04-13-2009, 01:38 PM

Putting up a Digi console along with the wiring and labour would cost somewhere around 3k+..

pranay · 04-13-2009, 01:41 PM

Quote:

Originally Posted by insanebiker

Putting up a Digi console along with the wiring and labour would cost somewhere around 3k+..

It didn't cost me that much when I put it on my V2. It cost me around 2400 including labour.

There will be certain wiring changes that have to be made. But it is, at the max, half a day's job.

04-10-2009, 10:16 PM	#1 (permalink)
Samuel Senior Member Join Date: Feb 2009 Location: Pune Posts: 129	Pulsar's digital console/ self-check purpose. Yo guys just wanted to know whats the purpose of self check thing that the digital pulsar shows when u turn on the ignition? And will it be possible to make our non digital pulsars do self checks like the digitals? Just imagine how cool it will look just like a sports bike.Both the needles turning all the way and coming back. What do u think people i need your reponse on this Will it be possible?

04-12-2009, 09:10 PM	#2 (permalink)
Aryan Senior Member Join Date: Jan 2006 Location: New Delhi/ Shillong Posts: 18,275	Topic Approved. __________________ ...in search of that perfect world - My Travel Blog :)

04-13-2009, 01:22 PM	#5 (permalink)
Thunder Everywhere Join Date: May 2007 Location: Chennai Posts: 838	Ive seen many V1 pulsars having the Digi Consoles of V3 pulsars.... They need a new set of wiring to be done - it can be done with the bajaj Guys itself - else - contact the Speedometer repair centres in your area ..... The Self Check is been implemented in all the Digi Console Bikes.....They check all the Wiring and Sensors status...... Analog Consoles doesnt have thie option ..... ...... ..... __________________ .......Just a Biker.......

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to check ur karizma is perfectly tuned or not.	ayush_sasi	Pit Stop:General Biking Discussion	36	Today 01:17 AM
pulsar digi console(meter)wiring diagram needed!	insane_x97	Help Me!	3	02-16-2009 11:10 PM
G2G CHECK IT OUT!!!	hi-octain	xBhp Offline Meets(G2G's)	78	02-05-2005 10:54 AM
Check out this bike!!	spacetribe	Superbike And Imports	28	11-13-2004 12:35 AM
check out this G2G.,.YEAH BABY!!!! big pics	Ron J	xBhp Offline Meets(G2G's)	26	08-10-2004 04:34 PM

04-12-2009, 09:15 PM	#3 (permalink)
svjhonda Senior Member Join Date: Sep 2008 Location: Kolkata Posts: 904	The self check is supposed to check the entire electircal loop for anu malfunctions. On sportbikes it also checks all the sensors for any problems. So the Pulsar's digital meter muct be checking only the electrical loop, of the LCD display. For a non digital speedo'ed Pulsar, I dont know. It will be a lot of work to make thw needles do a sweep. Also might fiddle with their calibrations and give you erratic readings in the long run. So your best bet would be fitting the LCD meter on your bike. I know it can be done. I had read it here on xbhp itself.

04-13-2009, 01:11 PM	#4 (permalink)
Samuel Senior Member Join Date: Feb 2009 Location: Pune Posts: 129	Thnx SVJ i was just curious to know will it possible to make our non digitals do the self check thing. As for fitting the didgital console will it fit perfectly on the non digitals and wht will be the overall cost for it? Wil it put any load on the battery or the current set of wiring?

04-13-2009, 01:38 PM	#6 (permalink)
insanebiker Petrol Head Join Date: Sep 2008 Location: India Posts: 1,238	Putting up a Digi console along with the wiring and labour would cost somewhere around 3k+..

Register Now for FREE!
Are you registered on xBhp yet? If not, do so now and start participating to be able to share photos and experiences with other members. It will also enable to you have a chance to be a part of xBhp contests and roadtrips in the future! Username: Password: Confirm Password: E-Mail: Confirm E-Mail: Birthday: Image Verification I agree to forum rules