RDD CDI kit worked magic! - Page 6 - xBhp.com : The Global Indian Biking Community

yamdoot · 01-02-2012, 05:12 PM

Quote:

Originally Posted by psr

@All
CDIs are simple devices used to generate a spark at a preset time in the combustion chamber through a spark plug....There are two types ie., a CDI with auto/switched advance, or without any advance..(static).The advancing of spark is validated by the shorter time allowed for each spark event,as the RPM rises.
Yamaha RX100 comes OE with static 22 degrees BTDC, and an auto advance/retard will improve performance and FE.
So it is essential to understand the basics of Ignition and what it CAN and CANNOT DO under the circumstances,before embarking on any changeover /DIY attempt.
Those with knowledge ,RPM and Timing lights ,and the SPIRIT can develop and install a CDI for a two stroker....As a starter I am giving here a CDI circuit for a Stock Yamaha 125cc......

What a lovely way of describing PSR sir. Thank you!

aargee · 01-02-2012, 07:06 PM

Latest from RDD...

"To all my friends and relatives. Please spread the word. That there is a new product on the market which will help reduce your carbon foot print. Boost the fuel efficiency and improve engine response.
Our first batch is rolling out this month. Its called the Fuel Miser. There isn't another product on the market as yet.
We even provide a switch which can go from fuel saving to all out power.
A.I. Code to switch between modes is also being developed.
It will also come with a Display which shows you your engines actual AIR Fuel Ratio"

The Great · 01-02-2012, 07:41 PM

Quote:

Originally Posted by rohitsapru

Okay I understood your point. I don't have anything else to contribute to this topic. Cheers mate.

Cheers to u too sir.

Quote:

Originally Posted by yamdoot

@The great. This post or my earlier one is in no way directed towards you in particular so dont take it otherwise pls.

I would never take anything otherwise from a veteran and a friend like you sir.

Quote:

Originally Posted by aargee

Latest from RDD...

"To all my friends and relatives. Please spread the word. That there is a new product on the market which will help reduce your carbon foot print. Boost the fuel efficiency and improve engine response.
Our first batch is rolling out this month. Its called the Fuel Miser. There isn't another product on the market as yet.
We even provide a switch which can go from fuel saving to all out power.
A.I. Code to switch between modes is also being developed.
It will also come with a Display which shows you your engines actual AIR Fuel Ratio"

Alas the prayers have been heard... hope still remains alive.

aargee · 01-02-2012, 07:51 PM

Quote:

Originally Posted by The Great

Alas the prayers have been heard... hope still remains alive.

Hope is a good thing, maybe the best of things, and no good thing ever dies
- Andy Dufresne, Shawshank Redemption

dafc · 01-03-2012, 05:32 PM

Quote:

Originally Posted by The Great

Alas the prayers have been heard... hope still remains alive.

MFW I saw the post in RX thread

aadi19 · 01-07-2012, 11:08 PM

dude how much did u pay for it and where in banglore can i get it please let me know

SriramEfunds · 01-08-2012, 04:38 PM

Quote:

Originally Posted by aadi19

dude how much did u pay for it and where in banglore can i get it please let me know

Your Location: Somewhere in India
RDD CDI Location: Somewhere in Bangalore... lol

aargee · 01-08-2012, 05:14 PM

^^^ Excellent reply

NitinGirish · 03-05-2012, 07:43 PM

Quote:

Originally Posted by SriramEfunds

This evening again took my bike for a ride and noticed couple of things:

1. Bike did not start until some kicks given (3-4), which I thought stock CDI would just require 1-2 (max) kicks to roar. I'm currently using NGK 'R' plug on my bike. Is this the correct?

2. When I turn off the engine, there is a slight delay when the engine stops. Is this ok?

Pardon me for bumping up an old thread. These are the exact two issues I faced on Saturday while I rode back home with the CDI installed. Is this issue resolved now? If yes, what was the solution for this?

SriramEfunds · 03-05-2012, 08:15 PM

Quote:

Originally Posted by NitinGirish

Pardon me for bumping up an old thread. These are the exact two issues I faced on Saturday while I rode back home with the CDI installed. Is this issue resolved now? If yes, what was the solution for this?

All I could remember is the timing was incorrect. After some trial and error method of changing position (since there was no access to timing light device) was able to get the bike started max 2 second kick. Mind you, the bike's choke cable is long gone.
Another way: I found my own way to get the bike started (though seniors can pitch in). I always try kick starting with kicker positioned at the top. If it doesn't then moved the bike a step to get the kicker compression from top and let go to start.

FYI.. Bike all of a sudden stalled on Saturday night on my way home from shopping. Checked the plug and there was no current passing. So did not experiment much on middle of the road, pushed the bike home (1 km) and parked it with other 2. Sunday had gone for the weekend ride(ZMA) and I'm yet to check as what went wrong. I'm confident that engine did not get ceased ( I'm careful with the bike) as there was good compression when tried to kick. I suspect some loose connection somewhere(God make it real) as I don't want to be on the state where RDD CDI blowing away (silly thoughts)!

01-02-2012, 07:06 PM	#52 (permalink)
aargee My world changed from smoke & 2T to ECM & 4 joke!! Join Date: Jan 2010 Location: Chennai Posts: 8,006	Latest from RDD... "To all my friends and relatives. Please spread the word. That there is a new product on the market which will help reduce your carbon foot print. Boost the fuel efficiency and improve engine response. Our first batch is rolling out this month. Its called the Fuel Miser. There isn't another product on the market as yet. We even provide a switch which can go from fuel saving to all out power. A.I. Code to switch between modes is also being developed. It will also come with a Display which shows you your engines actual AIR Fuel Ratio" __________________ Patience pays...The Vulture's virtue is patience and the bird always get it's food - Wise man saying This is not a bakery. I don't sugar coat anything. If you ask for my opinion...then that's what you'll get. Don't be mad when it's not what you want to hear

01-08-2012, 05:14 PM	#58 (permalink)
aargee My world changed from smoke & 2T to ECM & 4 joke!! Join Date: Jan 2010 Location: Chennai Posts: 8,006	^^^ Excellent reply __________________ Patience pays...The Vulture's virtue is patience and the bird always get it's food - Wise man saying This is not a bakery. I don't sugar coat anything. If you ask for my opinion...then that's what you'll get. Don't be mad when it's not what you want to hear

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: The Second Brandsmith Vintage Bike Drive creates magic	NewsReaper	News	0	09-18-2008 06:43 PM

01-07-2012, 11:08 PM	#56 (permalink)
aadi19 yamaha fanatic Join Date: Dec 2011 Location: somewhere in india Posts: 12	dude how much did u pay for it and where in banglore can i get it please let me know

Register Now for FREE!
Are you registered on xBhp yet? If not, do so now and start participating to be able to share photos and experiences with other members. It will also enable to you have a chance to be a part of xBhp contests and roadtrips in the future! Username: Password: Confirm Password: E-Mail: Confirm E-Mail: Birthday: Image Verification I agree to forum rules