The very Old RX100 (1986, Japan) - Page 3 - xBhp.com : The Global Indian Biking Community

satishg · 09-15-2011, 09:02 AM

anyone here with a late 1987 RX100? if you can post the production series no. on the cylinder whether it is Y1,Y2,G1, G2 ....thx

daredemon · 09-15-2011, 09:32 AM

Quote:

Originally Posted by sanjithjoseph

thankyou daredemon.
if you dont mind, your name?

Hi Sanjith,

My name is Lancy

sanjithjoseph · 09-15-2011, 11:21 PM

Quote:

Originally Posted by satishg

anyone here with a late 1987 RX100? if you can post the production series no. on the cylinder whether it is Y1,Y2,G1, G2 ....thx

Anyone got any info to share for the above query?

sanjithjoseph · 09-16-2011, 10:05 PM

Quote:

Originally Posted by satishg

anyone here with a late 1987 RX100? if you can post the production series no. on the cylinder whether it is Y1,Y2,G1, G2 ....thx

I think its G1..., Im not sure about it...

sanjithjoseph · 09-16-2011, 10:19 PM

1)Front brake cable assembly
2)Front shock oil seal + Oil
3)Fuel Tank rubber kit
4)Side body cover(left)
5)Back brake pedal spring
6)Back brake pedal + fittings
7)Silencer packing
8)Foot pedals + Rubber
9)NGK Iridium spark plugs
10)Air filter
11)Chain and sproket set
12)Corne set
13)Kicker + rubber
14)New seat
15)Side signal lights(Front and Rear Full set, changed Rajdoot lights because of the scratches on chrome part)
16)Signal light Flasher
17)Front and rear brake shoe
18)Rear carrier handle + springs
19)Front and rear wheel bearings
20)Central stand + fittings
21)Front brake cable
22)Rear view mirrors (Both side)
23)Front brake handle
24)Clutch apply handle
25)New key set
26)Fuel tank cap
27)Emblems
28)Handle grips from Yamaha spares(Both side)
29)New tool box (Tool box was originally near to the batterybox)
30)Front Tyre (MRF RIB 2.75-18)
31)Rear Tyre (MRF Moto-D 2.75-18)
32)New Exide Battery 12v
===================
33)Plating on Chrome parts
34)Polish on painted parts (Silicone Glaze, from Amway)
35)elf moto 2T sem synthetic oil
36)elf max booster
37)Head light Setup for 90/100 H4 (Hella),----> Thanks Nitesh for your great help
38)Flosser 90/100 H4 bulb --> again, Thanks Nitesh
39)wheel spokes(front & rear)
=====================
16/09/2011
=====================
40)Head and block Rubbers
41)Front Chrome mudguard
42)Front mudguard Flap + Front mudguard rubber holder
43)Butterfly crash guard
44)Pricol Oil pump
45)Gear lever + fittings
46)Lights Switch Unit
47)Socket assy pilot Lamp RH(2)
48)Socket pilot lamp LH
49)Lever Cam shaft (Front and Rear)

=====================

--

sanjithjoseph · 09-16-2011, 10:27 PM

1) New number plates with rubber bush for the rear one
2) Engine painting
3) 'YAMAHA' Stickers on Crank case
4) New Chain cover
5) 90/100 light kit
6) New fuel Tank
7) Front Discs

sanjithjoseph · 09-17-2011, 12:10 AM

Here is the Bike
any suggestions/critics, please post them..

continues...

NitinGirish · 09-17-2011, 06:08 PM

Quote:

Originally Posted by sanjithjoseph

1)30)Front Tyre (MRF RIB 2.75-18)
31)Rear Tyre (MRF Moto-D 2.75-18)
37)Head light Setup for 90/100 H4 (Hella),----> Thanks Nitesh for your great help
38)Flosser 90/100 H4 bulb --> again, Thanks Nitesh
=====================
16/09/2011
=====================
39)Head and block Rubbers
=====================

--

--

--

--

--

Sweet ride there Sanjit. Request you to share more information on the lighting set up. I am extremely interested.

Pic1 above, what part is that? Looks to big to be a 2T oil pump and 2T oil tank is made of plastic

More pictures of pic2 would be nice.

Also bore rubber kit, are they OE I mean in Yamaha packing? Again, humble request for pictures.

Finally, your feedback on the tyres and your reasons for the choice.

Sorry for so many questions!! I was infact, looking for pointers in all these areas. Hope you don't mind

sanjithjoseph · 09-18-2011, 11:19 PM

Quote:

Originally Posted by NitinGirish

Sweet ride there Sanjit. Request you to share more information on the lighting set up. I am extremely interested.

Pic1 above, what part is that? Looks to big to be a 2T oil pump and 2T oil tank is made of plastic

More pictures of pic2 would be nice.

Also bore rubber kit, are they OE I mean in Yamaha packing? Again, humble request for pictures.

Finally, your feedback on the tyres and your reasons for the choice.

Sorry for so many questions!! I was infact, looking for pointers in all these areas. Hope you don't mind

Thanks Nithin........................
sorry for the late reply..

Regarding the 90/100 light setup Im getting different opinion from different people. So Im on the process of getting more info for that.And 90/100 light kit from RD Dreams are no more available, Just heard like that...And at present as advised by Nitesh, Im thinking to get 90/100 light kit from Ravi Nagesh,Bangalore.
H4 bulbs wont get fitted with OE headlight setup and Im too particular in keeping the stock look for my bike. Hella has got the reflector + glass set which can suit H4 bulbs and Nitesh helped me to source one.You can contact him for any help in getting one or I have read some where like using DCM Toyota's light setup for H4 bulbs to get fitted and keeping stock look. But reflector set from hella will be a good choice..

Pic one is 2T Oil Pump from pricol, Photo is taken too close that is why it looks lil bit bigger in size.

Bore rubbers are OE ones, And the shop people promised me that some rubber parts which I have asked for can be collected in next week.

Im 100% satisfied with MRF Moto-D 2.75 tyre. Moto-D was the Tyre recommended by my friend for better grip and the rear tyre size shown in the owners handbook was 2.75.

The front tyre, MRF Rib was recommended by my mechanic.He told me that 'for the front tyres go for only line tyres and you will get a smooth ride'.In the owner's manual the front tyre size was 2.50. But I have chosen 2.75 since 2.50 will look tooo narrow.

For RX-135 I think the Tyre sizes are 3.00 at rear and 2.75 in front. I have read like 'michelin' has got some tyres with good feedback. Consider them too.
And you can get it clarified from Arun(Bigbore),karthikdattag,Sriramefunds,Nitesh(Ya mdoot),Ram,Satish,JD,sixspeedtwin and other seniors here...

Sorry for so many questions!!..hehe??!!!...Asking questions and getting them clarified is the only way to gather info which is gonna help to keep our machines clean and run for a long time....we all are here to help each other...even more questions are most welcome....I have gone through your thread...and you are getting ready for a

Job...all the best bro...Me too have got a lot to learn from you.

sanjithjoseph · 09-18-2011, 11:57 PM

few more parts
---------------

gasket set- to the parts Im collecting
------------------------------------

09-16-2011, 10:19 PM	#25 (permalink)
sanjithjoseph Senior Member Join Date: Apr 2011 Location: Piravom(Cochin) Posts: 446	Parts update 1)Front brake cable assembly 2)Front shock oil seal + Oil 3)Fuel Tank rubber kit 4)Side body cover(left) 5)Back brake pedal spring 6)Back brake pedal + fittings 7)Silencer packing 8)Foot pedals + Rubber 9)NGK Iridium spark plugs 10)Air filter 11)Chain and sproket set 12)Corne set 13)Kicker + rubber 14)New seat 15)Side signal lights(Front and Rear Full set, changed Rajdoot lights because of the scratches on chrome part) 16)Signal light Flasher 17)Front and rear brake shoe 18)Rear carrier handle + springs 19)Front and rear wheel bearings 20)Central stand + fittings 21)Front brake cable 22)Rear view mirrors (Both side) 23)Front brake handle 24)Clutch apply handle 25)New key set 26)Fuel tank cap 27)Emblems 28)Handle grips from Yamaha spares(Both side) 29)New tool box (Tool box was originally near to the batterybox) 30)Front Tyre (MRF RIB 2.75-18) 31)Rear Tyre (MRF Moto-D 2.75-18) 32)New Exide Battery 12v =================== 33)Plating on Chrome parts 34)Polish on painted parts (Silicone Glaze, from Amway) 35)elf moto 2T sem synthetic oil 36)elf max booster 37)Head light Setup for 90/100 H4 (Hella),----> Thanks Nitesh for your great help 38)Flosser 90/100 H4 bulb --> again, Thanks Nitesh 39)wheel spokes(front & rear) ===================== 16/09/2011 ===================== 40)Head and block Rubbers 41)Front Chrome mudguard 42)Front mudguard Flap + Front mudguard rubber holder 43)Butterfly crash guard 44)Pricol Oil pump 45)Gear lever + fittings 46)Lights Switch Unit 47)Socket assy pilot Lamp RH(2) 48)Socket pilot lamp LH 49)Lever Cam shaft (Front and Rear) ===================== -- -- -- -- -- __________________ YAMAHA RX100 - 1986 YEZDI ROADKING - 1996 http://www.xbhp.com/talkies/thumpers...986-japan.html http://www.xbhp.com/talkies/thumpers...ng-1996-a.html Your machine defines who you are! Last edited by sanjithjoseph; 09-19-2011 at 10:27 PM.

09-16-2011, 10:27 PM	#26 (permalink)
sanjithjoseph Senior Member Join Date: Apr 2011 Location: Piravom(Cochin) Posts: 446	And, now the Pending ones 1) New number plates with rubber bush for the rear one 2) Engine painting 3) 'YAMAHA' Stickers on Crank case 4) New Chain cover 5) 90/100 light kit 6) New fuel Tank 7) Front Discs __________________ YAMAHA RX100 - 1986 YEZDI ROADKING - 1996 http://www.xbhp.com/talkies/thumpers...986-japan.html http://www.xbhp.com/talkies/thumpers...ng-1996-a.html Your machine defines who you are!

09-17-2011, 12:10 AM	#27 (permalink)
sanjithjoseph Senior Member Join Date: Apr 2011 Location: Piravom(Cochin) Posts: 446	Here is the Bike any suggestions/critics, please post them.. continues... __________________ YAMAHA RX100 - 1986 YEZDI ROADKING - 1996 http://www.xbhp.com/talkies/thumpers...986-japan.html http://www.xbhp.com/talkies/thumpers...ng-1996-a.html Your machine defines who you are!

09-18-2011, 11:57 PM	#30 (permalink)
sanjithjoseph Senior Member Join Date: Apr 2011 Location: Piravom(Cochin) Posts: 446	Few more parts few more parts --------------- gasket set- to the parts Im collecting ------------------------------------ __________________ YAMAHA RX100 - 1986 YEZDI ROADKING - 1996 http://www.xbhp.com/talkies/thumpers...986-japan.html http://www.xbhp.com/talkies/thumpers...ng-1996-a.html Your machine defines who you are!

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread:

09-15-2011, 09:02 AM	#21 (permalink)
satishg You live more in five minutes on a bike like this Join Date: May 2004 Location: KL-05 Posts: 426	anyone here with a late 1987 RX100? if you can post the production series no. on the cylinder whether it is Y1,Y2,G1, G2 ....thx

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
COSMETIC REBULID: Yamaha RX100 1986	NitinGirish	Thumpers, Two Stroke And Exotics	90	11-29-2011 09:50 AM
[Photo Feature]: Saddlesore attempt on a 1986 RX 100	Incubus	The Tourer	72	08-26-2011 09:35 PM
[Photo Feature]: 2 Wheels in Tokyo, Japan!	bluevolt	Pit Stop:General Biking Discussion	58	05-27-2010 05:04 AM
BMW S1000RR goes to war against Japan Inc.	SAGARR_46	Superbike And Imports	9	12-06-2009 02:36 PM
hi from japan:)	hillpanther	Who Are You?	28	10-26-2009 02:29 PM

Register Now for FREE!
Are you registered on xBhp yet? If not, do so now and start participating to be able to share photos and experiences with other members. It will also enable to you have a chance to be a part of xBhp contests and roadtrips in the future! Username: Password: Confirm Password: E-Mail: Confirm E-Mail: Birthday: Image Verification I agree to forum rules