Yamdoot's RX135 rebuild - Page 3 - xBhp.com : The Global Indian Biking Community

atul_astro · 07-31-2009, 08:29 PM

quick update:

The RZ reeds arrived last evening.

time to start the intake porting

cheers

Atul

rambo · 07-31-2009, 11:22 PM

^^^wanted help regarding an exp chamber dude...
tell me atul,when ever its poss for you...
thankz...

Crankrd · 08-01-2009, 09:26 AM

Is it possible to fit RZ reeds on a RX

atul_astro · 08-01-2009, 01:33 PM

its obviously not a direct fit..requires mods to the intake, but yes very much possible

atul_astro · 08-08-2009, 01:24 PM

Time for a quick update

The rebore got completed yesterday. nice 45 degree hatch complete with chamfer. Time to wash the barrel and prepare for install

Also, in came another RX barrel for the RZ reed valve fitment. Nice big transfers and boost port on the thing already. Here's a few pics in comparison with stock ports. Only bad thing about it was it ran a shitty sleeve with mismatched ports. Will be corrected soon

Cheers

velociraptor13 · 08-08-2009, 07:16 PM

hi atul,good to see the rebuild.Looking forward to see your bike personally,if you don't mind

atul_astro · 11-27-2009, 02:01 AM

Time for a much needed and long awaited update on this build.

First off, the engine department got sorted a while ago on the bike. Then nitesh had suggested I take care of the cycle parts and paint as well. There began the cosmetic bit as well. I have to admit Im no paint/bling guru to begin with, but heck why not give it a shot. In came the list.

For starters, the gladiator full frontend. Nitesh didnt want any "bajaj" parts on the bike hence went with the yamaha theme. Got the full forks assy, hub, rotor and the mast cyl+caliper unit. Have attached pics.

Then followed a complete strip-down of chassis, rims, spokes. The front headlamp is off the YD125, so are the indicators. New spokes, front rim, new electricals and switch cluster. The central locking adapted from the Yamaha RXZ with the central switch as well.

The bike is now almost complete and ready to be given to Nitesh after a good 7 months [approx] Will be posting up finished pics as well.

Shivanshu · 11-27-2009, 09:31 AM

Great Atul Boss your work is always marvellous...its like magic in your hands....waiting for the final outcome

arvindraju · 11-27-2009, 10:16 AM

nice update atul saheb

jd666 · 11-27-2009, 11:10 PM

great work there man... i cant wait to complete my RXZ and post a work log soon.

07-31-2009, 08:29 PM	#21 (permalink)
atul_astro League Apart Join Date: Oct 2008 Location: Andheri [E] Mumbai Posts: 384	quick update: The RZ reeds arrived last evening. time to start the intake porting cheers Atul Attached Thumbnails __________________ 83' RD350 HT 96' RXG 97' RXZ 91'RX100>09'RX165 2010' HH ZMR

08-01-2009, 01:33 PM	#24 (permalink)
atul_astro League Apart Join Date: Oct 2008 Location: Andheri [E] Mumbai Posts: 384	its obviously not a direct fit..requires mods to the intake, but yes very much possible __________________ 83' RD350 HT 96' RXG 97' RXZ 91'RX100>09'RX165 2010' HH ZMR

08-08-2009, 01:24 PM	#25 (permalink)
atul_astro League Apart Join Date: Oct 2008 Location: Andheri [E] Mumbai Posts: 384	Time for a quick update The rebore got completed yesterday. nice 45 degree hatch complete with chamfer. Time to wash the barrel and prepare for install Also, in came another RX barrel for the RZ reed valve fitment. Nice big transfers and boost port on the thing already. Here's a few pics in comparison with stock ports. Only bad thing about it was it ran a shitty sleeve with mismatched ports. Will be corrected soon Cheers Attached Thumbnails __________________ 83' RD350 HT 96' RXG 97' RXZ 91'RX100>09'RX165 2010' HH ZMR

08-08-2009, 07:16 PM	#26 (permalink)
velociraptor13 DIESEL JUNKIE Join Date: Nov 2008 Location: Mumbai/Pattaya Posts: 1,478	hi atul,good to see the rebuild.Looking forward to see your bike personally,if you don't mind __________________ Two things are Infinite-universe And Human Stupidity.

11-27-2009, 02:01 AM	#27 (permalink)
atul_astro League Apart Join Date: Oct 2008 Location: Andheri [E] Mumbai Posts: 384	Time for a much needed and long awaited update on this build. First off, the engine department got sorted a while ago on the bike. Then nitesh had suggested I take care of the cycle parts and paint as well. There began the cosmetic bit as well. I have to admit Im no paint/bling guru to begin with, but heck why not give it a shot. In came the list. For starters, the gladiator full frontend. Nitesh didnt want any "bajaj" parts on the bike hence went with the yamaha theme. Got the full forks assy, hub, rotor and the mast cyl+caliper unit. Have attached pics. Then followed a complete strip-down of chassis, rims, spokes. The front headlamp is off the YD125, so are the indicators. New spokes, front rim, new electricals and switch cluster. The central locking adapted from the Yamaha RXZ with the central switch as well. The bike is now almost complete and ready to be given to Nitesh after a good 7 months [approx] Will be posting up finished pics as well. Attached Thumbnails __________________ 83' RD350 HT 96' RXG 97' RXZ 91'RX100>09'RX165 2010' HH ZMR

07-31-2009, 11:22 PM	#22 (permalink)
rambo Member Join Date: May 2009 Posts: 42	^^^wanted help regarding an exp chamber dude... tell me atul,when ever its poss for you... thankz...

08-01-2009, 09:26 AM	#23 (permalink)
Crankrd Member Join Date: Sep 2008 Posts: 57	Is it possible to fit RZ reeds on a RX

11-27-2009, 09:31 AM	#28 (permalink)
Shivanshu The Devil RXrider Join Date: Mar 2009 Location: New Delhi Posts: 2,247	Great Atul Boss your work is always marvellous...its like magic in your hands....waiting for the final outcome __________________ *Save the Earth - We are the one who are running out of time, as Earth will take it own time to heal but that time may not be enough for us.* http://www.ridesafewith.me *I dont just ride my bikes, I live with them.* Yamaha RX100 (1987) Yamaha YZF R15 (2010)

11-27-2009, 10:16 AM	#29 (permalink)
arvindraju Senior Member Join Date: Apr 2009 Location: Bangalore Posts: 368	nice update atul saheb

11-27-2009, 11:10 PM	#30 (permalink)
jd666 Senior Member Join Date: Sep 2009 Location: Gurgaon/Faridabad Posts: 3,320	great work there man... i cant wait to complete my RXZ and post a work log soon. __________________ The latest RXZ rebuild pics, updated July 2011 - http://www.xbhp.com/talkies/thumpers...tml#post669927 My offerings to the gods of speed - - Yamaha R15 - Yamaha RXZ 5 speed

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine Rebuild - Lack of Pick up and Compression	GP_freak	Help Me!	7	12-12-2009 05:16 PM
Insaneroller's Suzuki Shogun Rebuild	atul_astro	Thumpers, Two Stroke And Exotics	78	10-28-2009 01:06 AM
[What Bike]: Should i sell my Rx135 for Fz 16 ?	its_me_varma	What Bike?	39	07-22-2009 06:29 AM
Help with my RX135 Crank	blisteringintelligence	Help Me!	15	05-02-2009 05:25 PM
RX135, Need help!!!	sandyboy388	Help Me!	12	11-10-2008 12:21 PM

Register Now for FREE!
Are you registered on xBhp yet? If not, do so now and start participating to be able to share photos and experiences with other members. It will also enable to you have a chance to be a part of xBhp contests and roadtrips in the future! Username: Password: Confirm Password: E-Mail: Confirm E-Mail: Birthday: Image Verification I agree to forum rules