Thread: Pulsar 200 NS mods and Extras

Just don't take your ride for a highway spin for a while with GP shifting because you need to set out your mind from standard shift from your brain. Overall worth it.

Originally Posted by a_poor_blind_kid

Few pics of my 200cc "Faithful 2.0"

1: KTM Knuckle guards = Already proved their worth..Saved my knuckles from a BEST bus that brushed real close to me in the crazy Bombay traffic

2: Pulsar AS + Pulsar RS windshields = Much better stability on highways

3: Rear view mirrors with integrated side indicators

4: Red led pilot lights

Ride safe

Will only AS200 windscreen be sufficient?

Guys I need help.
I brought my dream bike 2 months back, NS 200 2017 edition. I love everything. The only problem I faced is position of brake lever. It is placed in uncomfortable position. If I keep my foot longer time i will experience some pain .
So is the height of the lever can be adjustable??

Originally Posted by Abhilash1233

Guys I need help.
I brought my dream bike 2 months back, NS 200 2017 edition. I love everything. The only problem I faced is position of brake lever. It is placed in uncomfortable position. If I keep my foot longer time i will experience some pain .
So is the height of the lever can be adjustable??

The SVC guys have told it cannot be adjusted . You can try using a thick rubber for the foot peg or change your feet position . Personally I keep my feet under the brake and during traffic I keep my feet straight ( the lever is slightly placed to the left ) .

Hey guys finally I was able to acquire the handle guards !
It was carbon fibre finish ( looks like that but definitely isn't ) and also has dual lights , one parking and one indicator mode .
I have also installed a mobile holder ! .

Shop location- JC road , Bangalore
Total cost - rs 2200

Originally Posted by abhijithpreddy

Hey guys finally I was able to acquire the handle guards !
It was carbon fibre finish ( looks like that but definitely isn't ) and also has dual lights , one parking and one indicator mode .
I have also installed a mobile holder ! .

Shop location- JC road , Bangalore
Total cost - rs 2200

How did you mount the knuckle guards on the clip-ons? Was it a direct fit?

can you share some pics of the mount

Hey guyz I love the exhaust note of the RS200 which is different from Ns200. Is that due to the end silencer chamber in RS?

Originally Posted by Vicky_New_Guy

How did you mount the knuckle guards on the clip-ons? Was it a direct fit?

can you share some pics of the mount

Although the shopkeeper said it was a direct fit it wasn't , the long screws provided with the guard had to be trimmed down a little to fit the handle .

The guards are fixed only on one side the other side remains free . It is a adjustable handle guard . The stock handle weights are removed and the guards are placed instead of it , long screws are provided with the guards to make it a fit .

Better give it to a workshop guy and he'll probably charge 200 or 300 bucks for fitting .

Originally Posted by abhijithpreddy

Will only AS200 windscreen be sufficient?

Not in my opinion. Even with just the AS Windshield there is a significant amount of windblast.
Have seen a few aftermarket windshields that are quite functional. Check out Sahyadri Motors based in Thane. They have some good mods for touring including the Windshield for the NS.

Would love to try the CBR250 Windshield but haven't been able to get my hands on one, yet.

Hi, I am wondering if its possible to replace the rear suspension of the NS with someother similar weighing bike? I was looking at the cbr250 rear shocks, do you think they would be direct fit and if its unsafe ?
Hope I am posting in the right section of the forum let me know if I need to remove this.