which handle-bar and mods for my unicorn?

Welcome to xBhp Forums v2020

Welcome to 2020 Edition of the xBhp Forums . As you might have already noticed, the forums have undergone a major upgrade to keep up with the times. This will make the forums faster and intuitive and much more mobile friendly.

The basic functioning of the forum remains the same.

We are still tightening the loose nuts and bolts and it will take some time.

However, in case you are facing any issues or problems accessing the forums or posting here, please do let us know.

Any feedback/suggestions are also welcome!

You can post your suggestions on this thread itself!

https://www.xbhp.com/talkies/forum-a...s-2020-welcome

See less

honda_vings replied

05-30-2009, 02:39 PM
Originally posted by bhargava_sr View Post

I have a 120x80-16 Dunlop Tyre in my Uni and it does increase the Initials and reduced the Top end for 5Kms.
How about clipons for your Uni - Check the one on my Uni -

wid dat 16" tyre rim u're nt only hurting ur top speeg but also handling and stability and the most important factor i.e. d confidence to throw d bike into corners. however if ur increasing d tyre sidewall 2" extra den normal size , den u will get back ur handling nd stability + better suspension due extra cushion(decompression scope) provided by 2" extra sidewall.
neways cn i c dose clips of ur uni(what's clipons?)
Leave a comment:
cschoudhary replied

05-30-2009, 10:10 AM
@roshan .... i would suggest to go for pulsar ug3 handlebar .. its short .. handling is good in hills as well as city riding.. dont go for a rear more than 110/70 .. thats the best for uni..
Leave a comment:
]|[ GorE replied

05-30-2009, 12:16 AM
How did you fit the clip on handle bars , bhargava ? I would appreciate any info you could give including which clip ons have you installed.
Leave a comment:
bhargava_sr replied

05-29-2009, 10:37 PM
Thats my Uni with Clipons
Leave a comment:
bhargava_sr replied

05-29-2009, 10:35 PM
I have a 120x80-16 Dunlop Tyre in my Uni and it does increase the Initials and reduced the Top end for 5Kms.
How about clipons for your Uni - Check the one on my Uni -
Leave a comment:
honda_vings replied

05-29-2009, 04:06 PM
use a rear tyre 110\80 it won't reduce ur pick-up /mileage, bt will improve d grip , n luks.
If dats nt fat enough den use 120\80 tubeless (mrf zapper C ).Reducing d wieght of d tube will prevent decrease in pick-up
Due to d V-shape of zapper C , the contact surface of the tyre is less when standing perpendicular to d road hence not much rise in grip , but will luk gud and will provide better cornering and leanng ability due to d v- shape.
Leave a comment:
naptrap replied

05-07-2009, 10:39 AM
Originally posted by roshanvallappillil View Post

in 'desi bikes',there is a thread named 'share youp creativity'. Check 326th post on page 33 by pranav nalleri.

okies..

not really awesome looking if you ask me..

but all the best with your mods!!
Leave a comment:
neville_kc replied

05-06-2009, 07:42 PM
Are you looking for something like this...

Picasa Web Albums - NeViLLe - Unicorn-FZ
Leave a comment:
roshanvallappillil replied

05-06-2009, 03:17 PM
HI

Originally posted by naptrap View Post

k&n filter will give you a small boost in power and pickup.

Unless you go for low profile tyres (reduce overall tyre weight) like the fz you may not have a loss of pickup or power.

But ideally why would you want to modify a unicorn?? The bike looks good in stock condition..

in 'desi bikes',there is a thread named 'share youp creativity'. Check 326th post on page 33 by pranav nalleri.
Leave a comment:
naptrap replied

05-06-2009, 01:45 PM
Originally posted by roshanvallappillil View Post

if i install a k&n filter,will i lose the pickup when installing wider tyres?

K&N filter will give you a small boost in power and pickup.

Unless you go for low profile tyres (reduce overall tyre weight) like the FZ you may not have a loss of pickup or power.

But ideally why would you want to modify a Unicorn?? The bike looks good in stock condition..
Leave a comment:
roshanvallappillil replied

05-06-2009, 12:45 PM
HI

Originally posted by thunder View Post

uni is good commuter and if u still loves to modify it --- there are ways.....

Go for the p150ug3 handle bar--- they fit well on uni and provides u a lean seating....u can have a bigger tyre ---- pirelli or mrf 120 will do the job....but u may loose the initial pickup and handling may be not the same of stock conditions....

Lost but not the least afaik modifying uni will purely damage its image .....

if i install a k&n filter,will i lose the pickup when installing wider tyres?
Leave a comment:
Thunder replied

05-06-2009, 11:50 AM
UNI is good commuter and if u still loves to modify it --- there are ways.....

Go for the P150UG3 handle bar--- they fit well on UNI and provides u a lean seating....U can have a bigger tyre ---- Pirelli or MRF 120 will do the job....But u may loose the initial Pickup and handling may be not the same of stock conditions....

Lost but not the least AFAIK modifying UNI will purely damage its image .....
Leave a comment:
Aryan replied

05-06-2009, 10:36 AM
Query Approved.
Leave a comment:
roshanvallappillil started a topic which handle-bar and mods for my unicorn?

05-06-2009, 10:25 AM
which handle-bar and mods for my unicorn?

i have a honda unicorn.i need to do some basic modifications in my unicorn. my basic necessity is changing the handle-bar.the stock handle-bar provided by the company is uncomfortable for me.
I have seen a unicorn with another bike's handle-bar. I asked the author of that post about the handlebar,but i have not yet recieved a reply.

i would like to know which handle bar can be used in my unicorn.? i require a short handle bar like the one in pulsar?

One more doubt.i have seen the photo of a unicorn modified by Pranav Nalleri. i would like to know about the tyres used in his unicorn.
Can i fit wide tyres like the one used by him or the one found in sports bike to be installed in the stock alloy wheel of honda unicorn?

nb:- 'stock' means the default parts supplied by the company.
Tags: handle, modifications, unicorn