Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us

Castrol Power 1

Red to green – let the cager go first.

Our Partners

Announcement

Collapse
No announcement yet.

KTM DUKE 250: CAN ABS FAILURE console error

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • KTM DUKE 250: CAN ABS FAILURE console error

    Hi,

    I've seen the error "CAN ABS FAILURE" multiple times while on long rides. This error stays on the console for a few seconds during which the ABS light will be ON and the warning light flashes. Most of the time it clears automatically after 5 seconds. I mostly noticed it while riding at around 80 km/hr speeds and braking or maybe I didn't notice the console at other speeds.

    I gave the bike in service center and the mechanic rode it and reproduced the issue. He mentioned that he checked all the electrical sockets etc., and fit them properly and after that he couldn't reproduce the isuse.

    I've found only one post regarding this error https://advrider.com/f/threads/husqv...363127/page-15. They also point at some loose connections.

    I'm glad that the mechanic fixed it. Wanted to know if anyone faced an issue with CAN bus before? This is quite dangerous since ABS is TURNED OFF during those 5 to 10 seconds.
    Last edited by xBhp; 08-05-2019, 03:32 PM.

  • #2
    Re: KTM DUKE 250: CAN ABS FAILURE console error

    Thread approved.

    Comment


    • #3
      Re: KTM DUKE 250: CAN ABS FAILURE console error

      I went for a long ride in the weekend and saw this error five times on the console. I'll talk to the mechanic again or check with ktm help directly.

      Comment


      • #4
        Re: KTM DUKE 250: CAN ABS FAILURE console error

        Originally posted by aj.jaswanth View Post
        Hi,

        I've seen the error "CAN ABS FAILURE" multiple times while on long rides. This error stays on the console for a few seconds during which the ABS light will be ON and the warning light flashes. Most of the time it clears automatically after 5 seconds. I mostly noticed it while riding at around 80 km/hr speeds and braking or maybe I didn't notice the console at other speeds.

        I gave the bike in service center and the mechanic rode it and reproduced the issue. He mentioned that he checked all the electrical sockets etc., and fit them properly and after that he couldn't reproduce the isuse.

        I've found only one post regarding this error https://advrider.com/f/threads/husqv...363127/page-15. They also point at some loose connections.

        I'm glad that the mechanic fixed it. Wanted to know if anyone faced an issue with CAN bus before? This is quite dangerous since ABS is TURNED OFF during those 5 to 10 seconds.
        I've meet the sam error on my duke 250, do you resolve this and how? many thanks

        Comment


        • #5
          Re: KTM DUKE 250: CAN ABS FAILURE console error

          Yes, I raised a complaint with KTM and the service center guys checked all the ECUs. They told me that they flashed / updated all of them. I didn't see this error after that. I still didn't go on a long trip yet. Will keep the thread updated if I face it again.

          Comment


          • #6
            Re: KTM DUKE 250: CAN ABS FAILURE console error

            Originally posted by aj.jaswanth View Post
            Yes, I raised a complaint with KTM and the service center guys checked all the ECUs. They told me that they flashed / updated all of them. I didn't see this error after that. I still didn't go on a long trip yet. Will keep the thread updated if I face it again.
            This post was not updated. Thought this info might help other.
            In my case this was because of ABS sensor cable near front tire, at the brake disk getting rubbed against the disk which caused the cable to short when I applied the brakes.
            This in-turn caused CAN bus failure, triple speed digits(the only time I hit 399Kmph ) and ECU failure.

            Solution: Just locate the part of the sensor cable which is rubbed off and put an insulation tape. Problem solved...

            KTM service mechanics took 2-3 weeks to decode the error codes from the ECU to figure this out. But not blaming them since this is something of a corner case.

            Comment


            • #7
              Re: KTM DUKE 250: CAN ABS FAILURE console error

              I forgot to update the post.

              I did see the CAN ABS FAILURE error multiple times even after they flashed the ECUs. In my case they found the problem with the ABS modulator and replaced it under warranty. I didn't see the error after that. I think the issue is solved.

              Comment


              • #8
                Re: KTM DUKE 250: CAN ABS FAILURE console error

                Replacing the abs modulator hasn't fixed the issue. I took the bike out for a quick ride and noticed the error again...
                I'll try to reproduce the issue once more and then raise a complaint with KTM. They seriously don't know the root cause of the issue.

                Comment

                Working...
                X