Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us

Axor
Magazine
Castrol Power 1

Hot days = molten tar = slip/slide.

Our Partner

Announcement

Collapse
No announcement yet.

Chain problem in Unicorn

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Chain problem in Unicorn

    Hi all,
    My Unicorn has done 20K Kms and around 1 month before (after a long ride) i started hearing weird noise from the chain guard when bike is doing a turn. On inspection I found that chain ply was very loose and got tightened by mechanic. But again after 1 week (arnd 100Kms) the same problem revisited. Last week I gave for servicing and still im facing the same problem.

    One of my friend told that I can remove some Links from the chain to make it tight. Is it fine or do I have to buy a new chain?
    Tags: chain, unicorn
  • #2
    Help Topic Approved
    The Wheel was a great invention; Two Wheels with a Motor in between was even better!


    BMW Motorrad Days 2011

    Xbhp's Indo-French Kashmir-Ladakh Tour

    Comment

    • #3
      Originally posted by tarmac_Prince View Post
      Hi all,
      My Unicorn has done 20K Kms and around 1 month before (after a long ride) i started hearing weird noise from the chain guard when bike is doing a turn. On inspection I found that chain ply was very loose and got tightened by mechanic. But again after 1 week (arnd 100Kms) the same problem revisited. Last week I gave for servicing and still im facing the same problem.

      One of my friend told that I can remove some Links from the chain to make it tight. Is it fine or do I have to buy a new chain?
      I had the same issue on my Fiero. The chain was about 25k Kms old. It used to scrape against the chain guard after running for about 10 kms. The chain as told to me, gets hot and expands and touches the guard. It had reached its max and could not be tightened further. I went in for a new set of sprockets and chain.
      **MaSh**

      **Work to Ride and Ride to Work**

      Comment

      • #4
        Your chain could be worn out prematurely because of infrequent/inadequate maintenance in the form of cleaning/oiling.

        You could try the following to see if it helps:

        1. Remove the chain from the bike
        2. Wash the chain in Kerosene/Diesel and dry
        3. Soak it in 90 grade oil
        4. Reinstall the chain

        This *may* help to a certain extent. Have the sprockets checked for wear - if they are worn the chain will be worn as well. Both need to be replaced together.

        Oil the chain frequently, using 90 grade oil. While this is dependent on type of riding conditions and usage, I'd say every 1000km is a good time - it takes a few minutes and is easy to perform.

        Comment

        • #5
          Average life of Chain/Sprocket for Unicorn is between 20-25k kms. Changing is better.

          Comment

          • #6
            Yup change the set as a complete, and follow the lubrication process as advised by nirvan above.


            My offerings to the gods of speed -

            - KTM Duke 200
            - Yamaha RXZ 5 speed


            Comment

            Previous template Next
            Working...
            X
            © xBhp.com 2026. All rights reserved.
            Designed by xBhp