![]() |
![]() |
![]() |
![]() |
|
|
|||||||
Help Me!
|
Register Now for FREE!
|
![]() |
|
|
LinkBack | Thread Tools | Rate Thread |
|
|
#1 (permalink) |
|
Junior Member
Join Date: Jan 2010
Location: Bangalore
Posts: 4
|
I own a discover 125 dts-i 2005 model....my odometer reads 48k kms....of late i am getting very low mileage and its emitting black smoke on high rpms...i hav tried every possible soln.....but its still the same....can anyone out thr figure out whr exactly the prob lies?
|
|
|
|
|
|
#2 (permalink) |
|
Senior Member
|
Query Approved.
__________________
...in search of that perfect world - My Travel Blog :) |
|
|
|
|
|
#5 (permalink) |
|
Senior Member
Join Date: Sep 2009
Location: Gurgaon/Faridabad
Posts: 3,390
|
time for overhaul.. Please get bike checked at a good workshop, where they can check the compression of the engine etc.
__________________
My offerings to the gods of speed - - KTM Duke 200 - Yamaha RXZ 5 speed |
|
|
|
|
|
#6 (permalink) |
|
Junior Member
Join Date: Jan 2010
Location: Bangalore
Posts: 4
|
Before hand i used to get around 50-55 kpl in city and now i am getting 40-44 kpl. Got the carb overhauled....valve timing checkd....spark plugs replaced....head overhauled....pickup is good so i dint get the clutch plates replaced....
|
|
|
|
|
|
#7 (permalink) |
|
Senior Member
Join Date: Sep 2009
Location: Pune, Sydney
Posts: 102
|
if the bike is making a clatter you can narrow down on the rings.
it seems your piston rings are a borderline case. they are holding under low load but letting go at higher load (high bmep) better open up the barrel and change them before you need a rebore and oversize piston. i would recommend moving to a better quality engine oil after you replace the rings. cheers
__________________
Abhishek |
|
|
|
|
|
#8 (permalink) |
|
Junior Member
Join Date: Jan 2010
Location: Bangalore
Posts: 4
|
thanks a lot for ur advice! till now i hav been getting my bike serviced at castrol bike zone. recently i visted bajaj service centre...the concerned person told me thrs a leakage in engine compression. suppose i get the piston rings replaced...which engine oil would u suggest?
Last edited by preetam; 02-03-2010 at 01:45 PM. |
|
|
|
![]() |
|
| Thread Tools | |
| Rate This Thread | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Mileage problem | dhanushs | Help Me! | 2 | 12-12-2009 05:47 PM |
| [Help]: Mileage problem with CBZ | balkishore | Help Me! | 10 | 07-02-2009 03:42 PM |
| [Help]: Mileage Problem in P150. | rakeshkn | Help Me! | 2 | 05-29-2009 03:29 AM |
| HELP: Serious Mileage problem Pulsar 150V1 | Richard | Help Me! | 29 | 11-12-2008 05:08 PM |