pulsar 220 dtsi clutch plate set in pulsar 180 dtsi ug III - xBhp.com : The Global Indian Biking Community

sumanmj · 01-18-2011, 11:51 PM

hi guys. i'm new to this forum. just had one query though. i have heard that the new clutch and gear setup in the pulsar 220 dtsi is very good. atleast better than what pulsars usually have had. i own a 2007 pulsar 180 dtsi ugIII and was about to change my clutch plates when it struck my mind that why not get a 220 dtsi clutch plate set installed on my bike if possible. just needed some help on whether it could be done and would it ibe beneficial for my ride.
P.S. my ride is complete stock except for a change of 15 teeth to 14 teeth sprocket in the front and 120/80 round profile dunlop magic in the rear.
thanx for any help in advance.

sunilg · 01-19-2011, 11:12 PM

Query moved and approved.

sumanmj · 01-19-2011, 11:52 PM

didn't really get wat moved and approved meant. is it moved to somewhere else.. if yes then where?

xionite · 01-20-2011, 12:01 AM

Quote:

Originally Posted by sumanmj

didn't really get wat moved and approved meant. is it moved to somewhere else.. if yes then where?

moved... as in, moved to the Help Me Section.
it's right here. you have nothing to worry about.

approved... as in, Thread Approved.

sumanmj · 01-20-2011, 12:02 AM

thanx a lot

sumanmj · 01-20-2011, 12:07 AM

Quote:

Originally Posted by xionite

moved... as in, moved to the Help Me Section.
it's right here. you have nothing to worry about.

approved... as in, Thread Approved.

thanx for that.. and yes.. ur mod looks fab..but the r15 fairing isn't huggin the tank that well..
if u can then do somethin about that..
now if any1 cud help me with dis..

xionite · 01-20-2011, 12:18 AM

Quote:

Originally Posted by sumanmj

thanx for that.. and yes.. ur mod looks fab..but the r15 fairing isn't huggin the tank that well..

Quote:

actually... it "hugs" the tank nice n proper.

sumanmj · 01-20-2011, 12:22 AM

Quote:

Originally Posted by xionite

actually... it "hugs" the tank nice n proper.

hehe.. actually wat i meant was that when u look at the side profile of ur ride, the fairing doesn't hug the tank as well as it does in case of an R15. it just looks as if the fairing's from some other bike.
thats obvious cos its not meant for pulsar..
thats all that i was tryin to say..
otherwise ur bike is superb..
i have seen lotta ppl tryin 2 fit r15 fairings to anythin n everythin.. but urs been the finest i have seen yet.

sumanmj · 01-20-2011, 12:24 AM

but seriously dude.. u got any idea about my query here???? anything?
m really in a fix now.. need to change the clutch plates n FAST!!

xionite · 01-20-2011, 12:32 AM

dunno if the P22O ones are a direct fit. will have to compare the two.

the P22O tyre, the P22O camshaft, the P22O rearsets, the P22O swingarm...

they're all virtual direct fits... but i have no idea bout da clutch plates.

01-18-2011, 11:51 PM	#1 (permalink)
sumanmj Junior Member Join Date: Jan 2011 Location: Kolkata Posts: 21	pulsar 220 dtsi clutch plate set in pulsar 180 dtsi ug III hi guys. i'm new to this forum. just had one query though. i have heard that the new clutch and gear setup in the pulsar 220 dtsi is very good. atleast better than what pulsars usually have had. i own a 2007 pulsar 180 dtsi ugIII and was about to change my clutch plates when it struck my mind that why not get a 220 dtsi clutch plate set installed on my bike if possible. just needed some help on whether it could be done and would it ibe beneficial for my ride. P.S. my ride is complete stock except for a change of 15 teeth to 14 teeth sprocket in the front and 120/80 round profile dunlop magic in the rear. thanx for any help in advance.

01-19-2011, 11:12 PM	#2 (permalink)
sunilg Super Moderator Join Date: Apr 2004 Location: Ghaziabad, UP, India. Posts: 5,075	Query moved and approved. __________________ (Been There Done That) x 3.25 Join xBhp On

01-20-2011, 12:32 AM	#10 (permalink)
xionite Who's your Doctor??? Join Date: Oct 2008 Location: New Bombay Posts: 2,141	dunno if the P22O ones are a direct fit. will have to compare the two. the P22O tyre, the P22O camshaft, the P22O rearsets, the P22O swingarm... they're all virtual direct fits... but i have no idea bout da clutch plates. __________________ . . . iPhoto! \| My Green-Mean P18OUGIII!

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pulsar 220 DTSI	vikas_r15	Motorcycle Ownership Experiences	20998	Today 04:21 PM
Clutch plate pulsar 150 dtsi	sagarBijwe	Help Me!	5	07-01-2010 05:47 PM
[What Bike]: Pulsar 220 dtsi or R15	sunny503	What Bike?	67	12-15-2009 09:07 AM
Help with Pulsar 150 DTSi	rakeshkn	Help Me!	6	09-11-2009 07:15 AM

01-19-2011, 11:52 PM	#3 (permalink)
sumanmj Junior Member Join Date: Jan 2011 Location: Kolkata Posts: 21	didn't really get wat moved and approved meant. is it moved to somewhere else.. if yes then where?

01-20-2011, 12:02 AM	#5 (permalink)
sumanmj Junior Member Join Date: Jan 2011 Location: Kolkata Posts: 21	thanx a lot

01-20-2011, 12:24 AM	#9 (permalink)
sumanmj Junior Member Join Date: Jan 2011 Location: Kolkata Posts: 21	but seriously dude.. u got any idea about my query here???? anything? m really in a fix now.. need to change the clutch plates n FAST!!

Register Now for FREE!
Are you registered on xBhp yet? If not, do so now and start participating to be able to share photos and experiences with other members. It will also enable to you have a chance to be a part of xBhp contests and roadtrips in the future! Username: Password: Confirm Password: E-Mail: Confirm E-Mail: Birthday: Image Verification I agree to forum rules