Angel Eyes HID projectorheadlamp fitting on Honda CBR 250R (Mumbai) - xBhp.com : The Global Indian Biking Community

mohitahuja · 12-16-2011, 12:29 PM

I had seen a delhi based dealer, MSX motorsport, selling honda cbr 250r angel eyes HID kit

. I am based out of mumbai and bought the angel eye kit (white angel ring and red glow inside), HID on low beam and high beam. The entire kit includes relay, angel eyes projector, HID kit with ballast and all wiring. I got a coil winding done also from an electrician to supply the additional current for HID

.
Can someone please guide me to a good mechanic who can open the fairing and fit the projector kit

????
I want to stick matt finish vinyl or apply matt finish spray paint on the reflector for added show. I need a good mechanic who can do a good job. I purchased the entire kit for Rs.2300/- at lamington road

. All mechanics there are noobs and charge a bomb, couldn't get myself to trust them with my bike. I bought white LED's for the pilot lamps.

Kayos_inc · 12-20-2011, 09:41 PM

hi, the only suggestion from me is you can't paint over a crome part, unless you can remove it. well I think the reflector is plastic part and cromed, and it can be removed with reverse electroplating, there are other ways to remove it , but it consists of using acids and they might eat your plastic reflector too.

12-16-2011, 12:29 PM	#1 (permalink)
mohitahuja Junior Member Join Date: Dec 2011 Location: Mumbai, India Posts: 1	Angel Eyes HID projectorheadlamp fitting on Honda CBR 250R (Mumbai) I had seen a delhi based dealer, MSX motorsport, selling honda cbr 250r angel eyes HID kit. I am based out of mumbai and bought the angel eye kit (white angel ring and red glow inside), HID on low beam and high beam. The entire kit includes relay, angel eyes projector, HID kit with ballast and all wiring. I got a coil winding done also from an electrician to supply the additional current for HID. Can someone please guide me to a good mechanic who can open the fairing and fit the projector kit???? I want to stick matt finish vinyl or apply matt finish spray paint on the reflector for added show. I need a good mechanic who can do a good job. I purchased the entire kit for Rs.2300/- at lamington road. All mechanics there are noobs and charge a bomb, couldn't get myself to trust them with my bike. I bought white LED's for the pilot lamps.

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mumbai to Delhi on Ninja 250R	Gahlaut	The Tourer	25	05-06-2012 03:10 AM
[xBhp Universal Thread]: Angel / Demon Eyes	Sunny	Universal Threads	74	02-05-2012 12:58 PM
Need help in getting new Headlamps wit Angel Eyes and new pair of RVM	Justrider	Help Me!	4	12-21-2011 02:36 PM
Mini saddle sore - Ninja 250R - Navi Mumbai to Nipani and back.	toolkit	The Tourer	8	11-20-2011 10:12 PM

12-20-2011, 09:41 PM	#2 (permalink)
Kayos_inc Aka Havoc Inc. Join Date: Dec 2008 Location: Rajkot Posts: 4	hi, the only suggestion from me is you can't paint over a crome part, unless you can remove it. well I think the reflector is plastic part and cromed, and it can be removed with reverse electroplating, there are other ways to remove it , but it consists of using acids and they might eat your plastic reflector too.

Register Now for FREE!
Are you registered on xBhp yet? If not, do so now and start participating to be able to share photos and experiences with other members. It will also enable to you have a chance to be a part of xBhp contests and roadtrips in the future! Username: Password: Confirm Password: E-Mail: Confirm E-Mail: Birthday: Image Verification I agree to forum rules