Bar ends - xBhp.com : The Global Indian Biking Community

SharkJaws · 12-31-2011, 12:04 AM

Has anybody tried fitting chrome bar ends of avenger onto pulsar 150 DTSi (2005)?

I bet they would look stunning, but I also wanted to get the clutch & brake levers replaced with chrome ones, not sure if avenger has them; but sure theya have chrome bar ends.

Noor · 12-31-2011, 02:18 PM

Query approved

SharkJaws · 12-31-2011, 09:32 PM

well not sure if someone had a look at my query above... people are kinda busy in new year celebratiions and me too...

Regarding bar end modification I got so much obsessed last night as I woke up this morning and went straight to Bajaj service center, asked for the Avenger bar ends and clutch & front brake lever ends... one of the service center totally refused, but pointed me to Dewan Bajaj in (Okhla Phase 3, New delhi) where the parts were available, but somewhat different from Pulsars stock stuff, however the clutch lever could be replaced if the lever base (yog) is also replaced, the left bar end was replced without any change, but the right bar end was replaced but a little gap had to be created with the help of a nut placed in the middle before fitting it to the handle bar as the throttle was too tight to snip back...

now the front brake lever, which is still pending asthe part they were having is not a compatible one, so i need to get to a probiking center in a day or two to get the same installed.

I will be posting pics for everyone to have a look when this stuff is complete....

Regarding looks - Man it looks awesome to me. Never knew my bike can also look like a sorts bike too... ;-)

Kirankj1724 · 01-04-2012, 11:03 AM

I had a similar thought for my RTR...

but with fz's bar ends...
Must say it looks cool..

Sent from my MT15i using Tapatalk

SharkJaws · 01-06-2012, 11:29 AM

Yes man, it looks cool. I will be uploading pics of the said changes on Sunday... You can then have a look. Also when I stop on traffic signals I have noticed other bikers feasting their eyes looking at this handle... lols

SharkJaws · 01-07-2012, 05:17 PM

This is how it looks like.... welll I am not a good photographer, so may be if I need to click from a diff angle and upload it, please le me know.!

12-31-2011, 12:04 AM	#1 (permalink)
SharkJaws Junior Member Join Date: Nov 2011 Location: New Delhi Posts: 23	Bar ends Has anybody tried fitting chrome bar ends of avenger onto pulsar 150 DTSi (2005)? I bet they would look stunning, but I also wanted to get the clutch & brake levers replaced with chrome ones, not sure if avenger has them; but sure theya have chrome bar ends.

12-31-2011, 02:18 PM	#2 (permalink)
Noor Administrator Join Date: Mar 2003 Location: Mumbai, Maharashtra, India. Posts: 2,336	Query approved __________________ Happiness is finding you have another Gear left.... Join xBhp On

01-04-2012, 11:03 AM	#4 (permalink)
Kirankj1724 Senior Member Join Date: Jan 2011 Location: Bangalore Posts: 109	Re: Bar ends I had a similar thought for my RTR... but with fz's bar ends... Must say it looks cool.. Sent from my MT15i using Tapatalk

01-07-2012, 05:17 PM	#6 (permalink)
SharkJaws Junior Member Join Date: Nov 2011 Location: New Delhi Posts: 23	How it looks like This is how it looks like.... welll I am not a good photographer, so may be if I need to click from a diff angle and upload it, please le me know.! Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread:

12-31-2011, 09:32 PM	#3 (permalink)
SharkJaws Junior Member Join Date: Nov 2011 Location: New Delhi Posts: 23	well not sure if someone had a look at my query above... people are kinda busy in new year celebratiions and me too... Regarding bar end modification I got so much obsessed last night as I woke up this morning and went straight to Bajaj service center, asked for the Avenger bar ends and clutch & front brake lever ends... one of the service center totally refused, but pointed me to Dewan Bajaj in (Okhla Phase 3, New delhi) where the parts were available, but somewhat different from Pulsars stock stuff, however the clutch lever could be replaced if the lever base (yog) is also replaced, the left bar end was replced without any change, but the right bar end was replaced but a little gap had to be created with the help of a nut placed in the middle before fitting it to the handle bar as the throttle was too tight to snip back... now the front brake lever, which is still pending asthe part they were having is not a compatible one, so i need to get to a probiking center in a day or two to get the same installed. I will be posting pics for everyone to have a look when this stuff is complete.... Regarding looks - Man it looks awesome to me. Never knew my bike can also look like a sorts bike too... ;-)

01-06-2012, 11:29 AM	#5 (permalink)
SharkJaws Junior Member Join Date: Nov 2011 Location: New Delhi Posts: 23	Yes man, it looks cool. I will be uploading pics of the said changes on Sunday... You can then have a look. Also when I stop on traffic signals I have noticed other bikers feasting their eyes looking at this handle... lols

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Following where it ends!!!	sumit.rhl	The Tourer	16	05-21-2011 01:08 PM
Journey Never Ends,only roads do	gurdeep31	Who Are You?	10	06-09-2010 08:17 PM
Best Motorcycle Travel Blogger Contest Ends	Sunny	The Tourer	0	03-02-2010 11:18 AM
Ride to the Unexplored,S01E04,Dead Ends	Hyperion	The Tourer	23	09-07-2009 11:48 AM
Dream-run ends - Bike stolen	diffuser911	Pit Stop:General Biking Discussion	50	09-04-2009 10:11 AM

Register Now for FREE!
Are you registered on xBhp yet? If not, do so now and start participating to be able to share photos and experiences with other members. It will also enable to you have a chance to be a part of xBhp contests and roadtrips in the future! Username: Password: Confirm Password: E-Mail: Confirm E-Mail: Birthday: Image Verification I agree to forum rules