Hi all , dis is varun frm ambala i own a pulsar 180 ug4 . .it was going fine and was giving me a good top end and good acceleration . . .last week when i got a k&n air filter installed . .and removed the whole box of stock air filter. . .the bike gave a good pick up and the top end was nearly the same. . . .but the problem started when i read about dis jetting thing on the forum and decided to go for it. . .i went to a mechanic in chandigarh and told him to upjet the carb . .but he instead of putting new jets with large size increased the size of hole of stock jets and fitted them . . .after that the bikes top end died i mean when i accelerate the bike in 5 th gear above 90kph the fuel supply cuts off ass if the bike is out of fule (i also noticed that dis happens even in small gears and high rpm i.e i cant reach high r.p.m ) . . .i showed the jets to a shopkeeper and he told that they are not damaged . . .he told me to check the diphagram of the carb . . , . .plz tell me any good mechanic in ambala,chandigarh or panchkula
. . . . .plz plz plz help me guyz becuse i am very tensed with the problem. . .