Help with Hero Honda Achiever - xBhp.com : The Global Indian Biking Community

ABHINAV THE SPEEDKING · 03-06-2010, 03:55 PM

heyy guys need help for my bike over few problems.

1. I own a hero honda achiever 150cc model of 2007 or the older one whichdoesnt has alloy wheels.

my problems are as follows:-

1. My first problem is that my bike skids a lot when i try to brake it from a speed near about 100kmph then it skids i have a mrf nylogrip zapper of size 3.00-18 as rear tyre of my bike.Will changing this to a tyre to mrf nylogrip zapper y of size 100/90-18 do me justice and i have a question that will using this tyre decrease my bikes pickup and topspeed.

2. My second problem is that i need a good engine oil from which i can gt good engine performance and protection.suggest me some brands with prices.

3. My third problem is that my bike vibrates a lot after 80 kmph is there any way to decrease the vibration of my bike.

4. My fourth problem is that my bike is showing signs of engine oil leaking at the area where the clutch cable enters the cranckcase and the area where the gear change lever enters the cranckcase plase suggest some solutions for this.

5. MY silencer when i accelarate my bike then there is some sound like gharr-gharr this sound didnt came earlier when i have shown it to mechanic then he told me that there are some small stones inside my muffler i told him to open it and turn it upside down but there was nothing coming out of it.

6. i wanted to upgrade my bike by adding allloy wheels and painting the whole lower console black ie the engine etc.can u suggest me that should i buy the alloy rims from hero honda service center or from market place in market they are available at rs 3000 and in service center they are of rs 5000.which paint is used to paint the engine black a spray or some other paint.please tell me wheter it will last long or not what is the charge approximately of job.

7. My front diskbrake is having black linings on the diskplate wht is the reason.

thnxxx in advance..................

Aryan · 03-06-2010, 04:24 PM

Query Renamed and Approved.

udayrrr · 03-07-2010, 01:03 PM

firstly welcome to xbhp
for
p1: better go for zapper c or better keep it in stock size and go for Michelin M45 3.00x18 without scarfing any thing
p2: use gulf pride 4t , in that there r 2 available grades 20w40 ,10w30
choose what ur bike requires
also with this u can eliminate some of vibrations(p3) to some extent

regarding others problems fellow xbhpians might be on their way......

unspoken91 · 03-07-2010, 09:41 PM

For engine oil leak. try changing the oil seals of ur engine . This could solve the problem.
For vibration just check if engine bore rubbers are ther. They decrease the vibration slightly.
Just try tightening the silencer cap . mounting bolts and all other screws respected to silencer.

ABHINAV THE SPEEDKING · 03-07-2010, 11:02 PM

thnxx guys

jasmeetsinghchawla · 03-07-2010, 11:13 PM

Engine is not spray painted it is powder coated mostly. After market alloys wheels should be of same weight and size and if you get the bill and warranty then they will do. The sound from the silencer could be from the loose bolts on the heat shield. The lining on the disc plate is due to the rubbing of shoe on the plate its normal.

ABHINAV THE SPEEDKING · 03-09-2010, 07:49 PM

thnxx jassmeet

ABHINAV THE SPEEDKING · 03-11-2010, 05:06 PM

heyy guys plzzz rply to all my ques i want more help

ABHINAV THE SPEEDKING · 03-16-2010, 08:31 PM

heyyy guys come on 100 views but only seven replies

help up guys

abhichotu.abhi · 03-16-2010, 08:48 PM

Quote:

Originally Posted by ABHINAV THE SPEEDKING

heyy guys need help for my bike over few problems.

1. I own a hero honda achiever 150cc model of 2007 or the older one whichdoesnt has alloy wheels.

my problems are as follows:-

1. My first problem is that my bike skids a lot when i try to brake it from a speed near about 100kmph then it skids i have a mrf nylogrip zapper of size 3.00-18 as rear tyre of my bike.Will changing this to a tyre to mrf nylogrip zapper y of size 100/90-18 do me justice and i have a question that will using this tyre decrease my bikes pickup and topspeed.

Depends on your BRAKING skills and Tyre condition too. Changing to a size greater than stock will increase top speed by a margin, but will kill the PICK-up.
2. My second problem is that i need a good engine oil from which i can gt good engine performance and protection.suggest me some brands with prices.
Semi synthetic oils:
Motul 5100 : 350-400rs
Valvoline 4T premium : 300rs
... many more

Synthetic oils:

Motul 300V: 600-800rs
Veedol
Petronas
many more...

3. My third problem is that my bike vibrates a lot after 80 kmph is there any way to decrease the vibration of my bike.

Changing to a good engine oil will reduce vibrations considerably. Also get the engine mount bolts tightened.

4. My fourth problem is that my bike is showing signs of engine oil leaking at the area where the clutch cable enters the cranckcase and the area where the gear change lever enters the cranckcase plase suggest some solutions for this.

Probably, Oil seals have given-up. Change them.

5. MY silencer when i accelarate my bike then there is some sound like gharr-gharr this sound didnt came earlier when i have shown it to mechanic then he told me that there are some small stones inside my muffler i told him to open it and turn it upside down but there was nothing coming out of it.

Some part inside silencer might have gone out of its place. Also the Mounting bolts of Silencer needs to be checkned

6. i wanted to upgrade my bike by adding allloy wheels and painting the whole lower console black ie the engine etc.can u suggest me that should i buy the alloy rims from hero honda service center or from market place in market they are available at rs 3000 and in service center they are of rs 5000.which paint is used to paint the engine black a spray or some other paint.please tell me wheter it will last long or not what is the charge approximately of job.

If you want stylish ALLOYS then you have only one option of upgrading from outside SC.

7. My front diskbrake is having black linings on the diskplate wht is the reason.
Donot know the reason, but, all bikes have them.
thnxxx in advance..................

Answers in bold

03-06-2010, 03:55 PM	#1 (permalink)
ABHINAV THE SPEEDKING Junior Member Join Date: Feb 2010 Location: I race in GWALIOR,MP Posts: 6	Help with Hero Honda Achiever heyy guys need help for my bike over few problems. 1. I own a hero honda achiever 150cc model of 2007 or the older one whichdoesnt has alloy wheels. my problems are as follows:- 1. My first problem is that my bike skids a lot when i try to brake it from a speed near about 100kmph then it skids i have a mrf nylogrip zapper of size 3.00-18 as rear tyre of my bike.Will changing this to a tyre to mrf nylogrip zapper y of size 100/90-18 do me justice and i have a question that will using this tyre decrease my bikes pickup and topspeed. 2. My second problem is that i need a good engine oil from which i can gt good engine performance and protection.suggest me some brands with prices. 3. My third problem is that my bike vibrates a lot after 80 kmph is there any way to decrease the vibration of my bike. 4. My fourth problem is that my bike is showing signs of engine oil leaking at the area where the clutch cable enters the cranckcase and the area where the gear change lever enters the cranckcase plase suggest some solutions for this. 5. MY silencer when i accelarate my bike then there is some sound like gharr-gharr this sound didnt came earlier when i have shown it to mechanic then he told me that there are some small stones inside my muffler i told him to open it and turn it upside down but there was nothing coming out of it. 6. i wanted to upgrade my bike by adding allloy wheels and painting the whole lower console black ie the engine etc.can u suggest me that should i buy the alloy rims from hero honda service center or from market place in market they are available at rs 3000 and in service center they are of rs 5000.which paint is used to paint the engine black a spray or some other paint.please tell me wheter it will last long or not what is the charge approximately of job. 7. My front diskbrake is having black linings on the diskplate wht is the reason. thnxxx in advance..................

03-06-2010, 04:24 PM	#2 (permalink)
Aryan Senior Member Join Date: Jan 2006 Location: New Delhi/ Shillong Posts: 18,275	Query Renamed and Approved. __________________ ...in search of that perfect world - My Travel Blog :)

03-07-2010, 11:13 PM	#6 (permalink)
jasmeetsinghchawla Senior Member Join Date: Apr 2004 Location: Raipur (C.G.) Posts: 590	Engine is not spray painted it is powder coated mostly. After market alloys wheels should be of same weight and size and if you get the bill and warranty then they will do. The sound from the silencer could be from the loose bolts on the heat shield. The lining on the disc plate is due to the rubbing of shoe on the plate its normal. Last edited by jasmeetsinghchawla; 03-07-2010 at 11:15 PM.

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Ownership Thread]: Hero Honda Splendor	shrinathrao	Motorcycle Ownership Experiences	172	Today 05:09 PM
[Ownership Thread]: Hero Honda Karizma ZMR	anmol_1990	Motorcycle Ownership Experiences	5196	Today 02:52 PM
[NEWS INDIA]: MTV Hero Honda : ROADIES 7 is here	thunderbird_m6	News	46	09-18-2009 12:40 AM
HELP me WITH MY HERO HONDA AMBITION??	raman sriharsha	Help Me!	10	06-23-2009 04:47 PM

03-07-2010, 01:03 PM	#3 (permalink)
udayrrr Senior Member Join Date: Jun 2009 Location: Hyderabad Posts: 128	firstly welcome to xbhp for p1: better go for zapper c or better keep it in stock size and go for Michelin M45 3.00x18 without scarfing any thing p2: use gulf pride 4t , in that there r 2 available grades 20w40 ,10w30 choose what ur bike requires also with this u can eliminate some of vibrations(p3) to some extent regarding others problems fellow xbhpians might be on their way......

03-07-2010, 09:41 PM	#4 (permalink)
unspoken91 Member Join Date: May 2009 Location: Bangalore Posts: 50	For engine oil leak. try changing the oil seals of ur engine . This could solve the problem. For vibration just check if engine bore rubbers are ther. They decrease the vibration slightly. Just try tightening the silencer cap . mounting bolts and all other screws respected to silencer.

03-07-2010, 11:02 PM	#5 (permalink)
ABHINAV THE SPEEDKING Junior Member Join Date: Feb 2010 Location: I race in GWALIOR,MP Posts: 6	thnxx guys

03-09-2010, 07:49 PM	#7 (permalink)
ABHINAV THE SPEEDKING Junior Member Join Date: Feb 2010 Location: I race in GWALIOR,MP Posts: 6	thnxx jassmeet

03-11-2010, 05:06 PM	#8 (permalink)
ABHINAV THE SPEEDKING Junior Member Join Date: Feb 2010 Location: I race in GWALIOR,MP Posts: 6	heyy guys plzzz rply to all my ques i want more help

03-16-2010, 08:31 PM	#9 (permalink)
ABHINAV THE SPEEDKING Junior Member Join Date: Feb 2010 Location: I race in GWALIOR,MP Posts: 6	heyyy guys come on 100 views but only seven replies help up guys

Register Now for FREE!
Are you registered on xBhp yet? If not, do so now and start participating to be able to share photos and experiences with other members. It will also enable to you have a chance to be a part of xBhp contests and roadtrips in the future! Username: Password: Confirm Password: E-Mail: Confirm E-Mail: Birthday: Image Verification I agree to forum rules