We are India’s most popular motorcycling community & portal. Our aims are
Promoting Safe Riding and Helmet Awareness Shaping motorycling as a lifestyle in India, especially on performance bikes Support bikers in India to realize their dreams and potential on two wheels
 

Go Back   xBhp.com : The Global Indian Biking Community > Help Me!

Featured on xBhp

Help Me!
If you have a problem with your bike, or seeking an accessory, manual or the like, then this is the place to ask. You can also help other people and gain a good rapport.

Register Now for FREE!
Are you registered on xBhp yet? If not, do so now and start participating to be able to share photos and experiences with other members. It will also enable to you have a chance to be a part of xBhp contests and roadtrips in the future!

Username: Password: Confirm Password: E-Mail: Confirm E-Mail:
Birthday:      
Image Verification
  I agree to forum rules 

Reply
 
LinkBack Thread Tools Rate Thread
Old 12-21-2011, 02:49 PM   #1 (permalink)
Junior Member
 
KLM364's Avatar
 
Join Date: Aug 2011
Location: Ernakulam, Kerala
Posts: 17
Default Fully synthetic on first service

When I was looking through the threads I saw that we need to wait 4000 or 6000 kms before putting FS on new motorcycles but when I gave my R15 for the first service they put FS at 800km. I believe that I can't change it back to mineral or SS now. Is this bad for the bike? Will this cause a problem later?
KLM364 is offline   Reply With Quote
Old 12-22-2011, 12:09 PM   #2 (permalink)
Super Moderator
 
sunilg's Avatar
 
Join Date: Apr 2004
Location: Ghaziabad, UP, India.
Posts: 5,075
Send a message via Yahoo to sunilg
Default

Query approved.
__________________
(Been There Done That) x 3.25

Join xBhp On

sunilg is offline   Reply With Quote
Old 12-22-2011, 06:14 PM   #3 (permalink)
Distinguished Member!!
 
pioneeraron's Avatar
 
Join Date: Nov 2009
Location: Mumbai/mulund.
Posts: 126
Send a message via Yahoo to pioneeraron
Default

@KLM

Buddy you better wait and complete ur runnin and use mineral oil till 10,000kms so that engine sets and proper wear and tear occurs.After that you can shift to Fully synthetic oil.I suggest you first shift to semi synthetic and then to fully.

P.S:

Present oil wont cause any harm.It will only prolong ur wear and tear procedure.Nothing to worry.
__________________
In A War Only Men DIE!!

Hero Honda CBZ (34000kms) Running on Motul 7100 20w50 Fully Synthetic.
Fiat Linea Emotion Pack Petrol (8800kms) Running on Selenia K 5w40 Semi Synthetic.

Last edited by pioneeraron; 12-22-2011 at 06:16 PM.
pioneeraron is offline   Reply With Quote
Old 12-23-2011, 07:58 AM   #4 (permalink)
Still learning the art of bike'in..
 
Honda_CBF's Avatar
 
Join Date: Jan 2011
Location: Jamshedpur, Jharkhand
Posts: 692
Default

If you use FS so early, then you have to run-in for longer period of time may be 10k instead of 2k.
Btw, what oil it is.. I mean name?
Honda_CBF is offline   Reply With Quote
Old 12-23-2011, 02:05 PM   #5 (permalink)
Senior Member
 
Pinaki's Avatar
 
Join Date: May 2010
Location: Calcutta
Posts: 885
Default

Quote:
Originally Posted by KLM364 View Post
When I was looking through the threads I saw that we need to wait 4000 or 6000 kms before putting FS on new motorcycles but when I gave my R15 for the first service they put FS at 800km. I believe that I can't change it back to mineral or SS now. Is this bad for the bike? Will this cause a problem later?
Read your R15 owners manual , what does it say about oil ? As far as I can recall yamaha specifies Semi-Synthetic/Synthetic Yamalube for that bike and it comes filled with with the same from factory too .

Last edited by Pinaki; 12-23-2011 at 02:07 PM.
Pinaki is offline   Reply With Quote
Old 12-25-2011, 08:58 AM   #6 (permalink)
Junior Member
 
KLM364's Avatar
 
Join Date: Aug 2011
Location: Ernakulam, Kerala
Posts: 17
Default

@Honda_CBF
On the 1st service bill it says they used full synthetic motor oil 15W50

@Pinaki
manual says SAE 20W-40 or SAE 20W-50

Does this mean i have to keep the bike below 6k rpm till 10k kms?

Last edited by KLM364; 12-25-2011 at 11:10 AM.
KLM364 is offline   Reply With Quote
Old 12-25-2011, 09:58 AM   #7 (permalink)
The D.I.Y Angel :P
 
Aneesh@4GHz's Avatar
 
Join Date: Aug 2010
Location: Kollam,Kerala
Posts: 3,375
Default

Read somewhere that using FS oil early in R15 is normal and wont cause any problems.Not sure though Post this query at R15 Ownership Thread.
__________________

2006 Karizma [ SOLD ]
Aneesh@4GHz is offline   Reply With Quote
Old 12-25-2011, 11:16 AM   #8 (permalink)
Junior Member
 
KLM364's Avatar
 
Join Date: Aug 2011
Location: Ernakulam, Kerala
Posts: 17
Default

When i posted in the ownership thread someone did say that he used FS very early and had no problems with it
KLM364 is offline   Reply With Quote
Old 12-25-2011, 10:43 PM   #9 (permalink)
Still learning the art of bike'in..
 
Honda_CBF's Avatar
 
Join Date: Jan 2011
Location: Jamshedpur, Jharkhand
Posts: 692
Default

There won't be any problem or issues if FS oils is used early.
The only thing it will cause is prolong engine run-in period.
When engines are runned-in with mineral oils one must not rev high (usually 4k rpm on most Indian bikes) but i dont know anyone (including me) who runned-in with synthetic oil so i really can't comment on that.
So, be sure there won't be any problem with FS, Period.

Last edited by Honda_CBF; 12-25-2011 at 10:47 PM.
Honda_CBF is offline   Reply With Quote
Old 12-25-2011, 11:06 PM   #10 (permalink)
Junior Member
 
Join Date: Jul 2011
Posts: 8
Smile

i used FS from my 2nd service( 5k) for my RTR EFI 160...total km 40k+..no issues from my side...actually it saved my engine recently from leagake in inlet valve...if i had used normal oil my would have been ceased...
imsuperkool is offline   Reply With Quote
Reply
Visit castrolbiking.co.in Visit Ceat Tyres
 

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fully automatic DC changeover in Pulsar UGIII models. timi Do it Yourself! 23 12-31-2011 08:00 AM
NGK PLATINUM SPARK PLUG and Petronas fully synthetic oil FOR HH CBZ EXTREME kaka Help Me! 32 12-23-2010 12:05 AM
Help with synthetic oil for Zma R snookersan Help Me! 8 11-17-2010 09:21 PM
[NEWS ABROAD]: Zerotracer...Fully enclosed motorcycle It's me News 2 07-01-2010 02:56 PM
Synthetic Oil for Pulsar 150 DTSi jacobkjacob Help Me! 40 03-21-2010 10:28 PM


All times are GMT +5.5. The time now is 03:29 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
xBhp.com