Let there be Light : Bike Lighting, HID etc - Page 43 - xBhp.com : The Global Indian Biking Community

balajidiwakar · 07-11-2009, 04:56 PM

hi guys, actually I was trying to install the avenger stator plate in my pulsar. got stuck with the electrical stuff...gotta few queries..see the pics below:

This one is the stock one

This is the avenger's. The neutral connection is separate

My question is how do I connect the neutral wire into the wiring harness. Please help

killerrider · 07-13-2009, 01:51 PM

I have Apache RTR 160.
i want to use 55w bulb in my byk nd i did it earlier bt result was bettery consumed alot.. after fiting relay after that i remove 55w bulb nd fittied same 35 w.. bt i again want to fit 55w bulb bt wid less bettery consume
as i read before that some guys r using Avenger coil for bulb can i also use it in ma byk.. is it harm for my byk or its good.??
plzz help reply soon
yo0

dual disc 200 · 07-13-2009, 02:10 PM

Quote:

Originally Posted by killerrider

I have Apache RTR 160.
i want to use 55w bulb in my byk nd i did it earlier bt result was bettery consumed alot.. after fiting relay after that i remove 55w bulb nd fittied same 35 w.. bt i again want to fit 55w bulb bt wid less bettery consume
as i read before that some guys r using Avenger coil for bulb can i also use it in ma byk.. is it harm for my byk or its good.??
plzz help reply soon
yo0

Dude, first of all Welcome to X-BHP!!
see, using a 55w bulb in place of 35w is almost the same where the brightness will be the same as 35w, as the coil in ur bike cant generate enough current to power up a 55w one. Secondly, i'm wondering how did a 55w bulb eat ur battery as ur bulb is running on AC and only pass will work in DC in RTR's. If that's right, did u use pass continuously or did u convert ur bikes electricals to DC??? U cannot use avengers coil plates as it fits only in pulsars and not RTR's!!!(correct me in this if i'm wrong) Why dont u save up some money and go for HID's??

rahuldevnath · 07-13-2009, 08:45 PM

Quote:

Originally Posted by balajidiwakar

hi guys, actually I was trying to install the avenger stator plate in my pulsar. got stuck with the electrical stuff...gotta few queries..see the pics below:

This one is the stock one

This is the avenger's. The neutral connection is separate

My question is how do I connect the neutral wire into the wiring harness. Please help

I assume that you are installing avenger coil on a Pulsar, that is GND, and will be connected to GND socket, located just next to the coil assembly. Its on right hand side of the coil, where the sprocket is.

killerrider · 07-13-2009, 09:06 PM

Dude, first of all Welcome to X-BHP!!
see, using a 55w bulb in place of 35w is almost the same where the brightness will be the same as 35w, as the coil in ur bike cant generate enough current to power up a 55w one. Secondly, i'm wondering how did a 55w bulb eat ur battery as ur bulb is running on AC and only pass will work in DC in RTR's. If that's right, did u use pass continuously or did u convert ur bikes electricals to DC??? U cannot use avengers coil plates as it fits only in pulsars and not RTR's!!!(correct me in this if i'm wrong) Why dont u save up some money and go for HID's?? __________________

thanxx broo bt i dont want HId ..
I heared that its also consume bettery too much.
Any other idea??

pavanchirmade · 07-13-2009, 09:48 PM

Quote:

Originally Posted by rahuldevnath

I assume that you are installing avenger coil on a Pulsar, that is GND, and will be connected to GND socket, located just next to the coil assembly. Its on right hand side of the coil, where the sprocket is.

U sure thats gnd buddy?
IMO that is the neutral indicator signal cable.

balajidiwakar · 07-14-2009, 07:19 AM

Quote:

Originally Posted by pavanchirmade

U sure thats gnd buddy?
IMO that is the neutral indicator signal cable.

ya it is not GND. There is another wire for that and it fits properly. The one I have shown in the pics is actually the neutral indicator wire..

rahuldevnath · 07-14-2009, 10:15 AM

Quote:

Originally Posted by balajidiwakar

ya it is not GND. There is another wire for that and it fits properly. The one I have shown in the pics is actually the neutral indicator wire..

If thats the case why don't you cut and tap to the bikes wiring?

balajidiwakar · 07-14-2009, 02:03 PM

Quote:

Originally Posted by rahuldevnath

If thats the case why don't you cut and tap to the bikes wiring?

Hi rahul, I tried to remove the blue-white wire from the harness and inserted the green wire in its place. But bike did not start. Can you gemme a bit more explanation, if possible a diagram, as I have no experience with the electricals.

dominic · 07-14-2009, 02:48 PM

Quote:

Originally Posted by rahuldevnath

If thats the case why don't you cut and tap to the bikes wiring?

that's exactly what my mech did

07-13-2009, 01:51 PM	#422 (permalink)
killerrider Junior Member Join Date: Mar 2009 Location: EARTHVASI Posts: 25	want 55w bulb for my Apache RTR 160 I have Apache RTR 160. i want to use 55w bulb in my byk nd i did it earlier bt result was bettery consumed alot.. after fiting relay after that i remove 55w bulb nd fittied same 35 w.. bt i again want to fit 55w bulb bt wid less bettery consume as i read before that some guys r using Avenger coil for bulb can i also use it in ma byk.. is it harm for my byk or its good.?? plzz help reply soon yo0

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Help]: Why does the 'red light' keep glowing?	himanshumm	Help Me!	9	12-29-2009 11:12 AM
Can we install a H.I.D. lighting system in a Pulsar 180 UG1?	alickb	Help Me!	4	12-12-2009 05:33 PM
can any one put some light on it	eessa	Pit Stop:General Biking Discussion	1	10-15-2009 12:09 PM
Traffic Light GPs	Sunny	Superbike And Imports	9	11-26-2008 08:44 PM
Buell Lighting City XXB9SX	ace619	Superbike And Imports	22	11-27-2004 05:35 AM

07-11-2009, 04:56 PM	#421 (permalink)
balajidiwakar me kan has kustome title Join Date: Jul 2009 Location: Gods Own Country Posts: 327	hi guys, actually I was trying to install the avenger stator plate in my pulsar. got stuck with the electrical stuff...gotta few queries..see the pics below: This one is the stock one This is the avenger's. The neutral connection is separate My question is how do I connect the neutral wire into the wiring harness. Please help

07-13-2009, 09:06 PM	#425 (permalink)
killerrider Junior Member Join Date: Mar 2009 Location: EARTHVASI Posts: 25	Dude, first of all Welcome to X-BHP!! see, using a 55w bulb in place of 35w is almost the same where the brightness will be the same as 35w, as the coil in ur bike cant generate enough current to power up a 55w one. Secondly, i'm wondering how did a 55w bulb eat ur battery as ur bulb is running on AC and only pass will work in DC in RTR's. If that's right, did u use pass continuously or did u convert ur bikes electricals to DC??? U cannot use avengers coil plates as it fits only in pulsars and not RTR's!!!(correct me in this if i'm wrong) Why dont u save up some money and go for HID's?? __________________ thanxx broo bt i dont want HId .. I heared that its also consume bettery too much. Any other idea??

Register Now for FREE!
Are you registered on xBhp yet? If not, do so now and start participating to be able to share photos and experiences with other members. It will also enable to you have a chance to be a part of xBhp contests and roadtrips in the future! Username: Password: Confirm Password: E-Mail: Confirm E-Mail: Birthday: Image Verification I agree to forum rules