Tweet
^^ Use a glue gun and glue it to your bikes alloy spoke.
-
My offerings to the gods of speed -
- KTM Duke 200
- Yamaha RXZ 5 speed
-
Thank YouOriginally posted by jd666 View Post
what I wanted to know is that the magnet is to be placed at max 5mm apart from the sensor which is very small a gap. If I stick the magnet to the alloy, the distance is quite more(provided the sensor is fitted on the suspension fork). Scratching my head as to where and how to fit them 5mm apart.
RIDE SAFEComment
-
^^ fit the sensor on a bracket. The bracket can be fitted to the fork leg ( get any generic clamp from a hardware store that can be adjusted for diameter ). That lets you keep the sensor at any distance you want from the magnet.
My offerings to the gods of speed -
- KTM Duke 200
- Yamaha RXZ 5 speed
Comment
-
Thank YouOriginally posted by jd666 View Post
can you please help me with a pic?
will a worm type hose clamp do the job?
I know only one type of clamp that can be adjusted for dia and that is a hose clamp as shown in the attached pic.
RIDE SAFEComment
-
hey guys,
I am using RaceDynamics ECU setup by joel. it also provides options for speedo correction. At 10k rpm in 6th gear, my bike reads 140kmph with the stock gearing.PM me for Daytona Racing ECU for the R15
sigpicComment
-
Yup it will work. Just mount a plate ( patti ) between the clamp and the front fork and bend it 90 degrees. Cut to desired length and mount sensor. done.Originally posted by Prakritij View PostThank You
can you please help me with a pic?
will a worm type hose clamp do the job?
I know only one type of clamp that can be adjusted for dia and that is a hose clamp as shown in the attached pic.
RIDE SAFE
My offerings to the gods of speed -
- KTM Duke 200
- Yamaha RXZ 5 speed
Comment
-
Offtopic
Originally posted by jd666 View PostYup it will work. Just mount a plate ( patti ) between the clamp and the front fork and bend it 90 degrees. Cut to desired length and mount sensor. done.
OFFTOPIC: JD, you again managed to miss the JUMBO G2G. You trying to avoid us man??
"HASTA LA VICTORIA, SIEMPRE !" - Chesigpic
http://www.xbhp.com/talkies/tourer/18983-spicy-sour-sweet-short-honeymoon-trip.html
http://www.xbhp.com/talkies/tourer/20306-pursuit-swarghat.html#post716409
http://www.xbhp.com/talkies/tourer/2...sary-trip.html
http://www.xbhp.com/talkies/tourer/2...adventure.html
http://www.xbhp.com/talkies/tourer/2...j-monsoon.htmlComment
-
Did it
RIDE SAFEComment
-
Thanks to all
RIDE SAFEComment
-
how accurate is itKawasaki KB100/enduro/125 substitute parts list http://www.xbhp.com/talkies/508615-post105.htmlComment
-
quite Accurate...1st I entered the circumference approximately and it was showing 3-4kmph less than the Speedo at all speeds and given that Digital Speedos shows 10% more than original speed, I am Happy with itOriginally posted by kb100 View Post
RIDE SAFEComment
-
where did you buy it fromKawasaki KB100/enduro/125 substitute parts list http://www.xbhp.com/talkies/508615-post105.htmlComment
-
-
any make or model and how much did it cost and how did you pay
Kawasaki KB100/enduro/125 substitute parts list http://www.xbhp.com/talkies/508615-post105.htmlComment
-
Rs.300/- thats about $6Originally posted by kb100 View Postany make or model and how much did it cost and how did you pay
man all the ones in that range are similar in Quality...so don't look for make and model.
these are the lowest priced ones.
if you want to go for good Quality ones, go for Sigma starts from around Rs.1000/-
RIDE SAFEComment
Comment