Tweet
i thought i was the one advising about the sigma
-
Kawasaki KB100/enduro/125 substitute parts list http://www.xbhp.com/talkies/508615-post105.html -
oops.....you were the oneOriginally posted by kb100 View Posti thought i was the one advising about the sigma
RIDE SAFEComment
-
i have a assize cyclocomp lying around. bought it for Rs.900 about a year ago. It is completely waterproof. but sadly it didn't work well with my RXZ. I had all the setup ready and it did show me readings when i spinned the front wheel, but as soon as i started the bike there was an interference and it showed all random values. It worked perfectly on a bicycle though. Tried covering the sparkplug wire and assembly and also the cyclocomps wires with aluminium foil thinking it may isolate the interference but no help. Any one faced a similar problem? And solved?You gotta risk it.. to get da biscuit !!!Comment
-
see if something is interfering the signal between the sensor and the magnet while Wheel Rotation
my Cyclocomp is showing less speed than the speedo by 5-6kmph which may be due to the approximate Wheel circumference I input in it. Will measure it correctly and see
RIDE SAFEComment
-
circumference confusion
@Prakritij : Need your help in entering wheel size input.
My bike's tyre reads 3.25 - 19
There is no entry for this on the chart supplied with my speedometer.
What entry it accepts ; tyre circumference or circumference at the point where sensor is installed
Comment
-
bro...at any point no matter where you put the magnet, all over the wheel the rpm will be same
measure the wheel dia(with tire) and you will get the circumference...P=ПD
where P=perimeter(circumference)
П=3.14
D=diameter
and do upload and show me the pics
RIDE SAFEComment
-
thanks for help
Thanks for prompt response and refreshing my high school mathsOriginally posted by Prakritij View Postbro...at any point no matter where you put the magnet, all over the wheel the rpm will be same
measure the wheel dia(with tire) and you will get the circumference...P=ПD
where P=perimeter(circumference)
П=3.14
D=diameter
and do upload and show me the pics
RIDE SAFE
I will calculate using this formula and also cross check by putting a mark on tyre and rolling it over floor.
BTW what is the meaning of 3.25 - 19 written on tyre ? As per my understanding 19" is rim size and 3.25 is Profile height of tyre. So the circumference should be =3.14*(19+(3.25*2))*2.54*10
i.e. 2034 in mm.
Please correct me if wrong.Comment
-
regarding the maths, I was just showing offOriginally posted by amardeep2006 View PostThanks for prompt response and refreshing my high school maths
I will calculate using this formula and also cross check by putting a mark on tyre and rolling it over floor.
BTW what is the meaning of 3.25 - 19 written on tyre ? As per my understanding 19" is rim size and 3.25 is Profile height of tyre. So the circumference should be =3.14*(19+(3.25*2))*2.54*10
i.e. 2034 in mm.
Please correct me if wrong.
you can to the tire rolling or just measure the dia with a tape.
3.25 - 19 means : 3.25 is the width of the tire and 19 is the rim dia in inches. I think the height and width of the tire ia same, giving an aspect ratio of 100%.
btw, which Bike do you have with 19" tire? RE??
RIDE SAFEComment
-
Yes it is RE electra 5S.Originally posted by Prakritij View Postregarding the maths, I was just showing off
you can to the tire rolling or just measure the dia with a tape.
3.25 - 19 means : 3.25 is the width of the tire and 19 is the rim dia in inches. I think the height and width of the tire ia same, giving an aspect ratio of 100%.
btw, which Bike do you have with 19" tire? RE??
RIDE SAFE
Now I am clear with my calculations. I will upload the pics after installation.Comment
-
great
waiting for the pics
also mention if you are getting readings close to the Speedometer. Which brand is the Cyclocomp?
RIDE SAFEComment
-
I bough it from ebay for Rs. 377 . This seems Chinese item with brand name SanDing. It contains Total 14 features with default as digital clock. The seller also provided me two spare batteries and mobile screen-card as free gift worth Rs. 100Originally posted by Prakritij View Postgreat
waiting for the pics
also mention if you are getting readings close to the Speedometer. Which brand is the Cyclocomp?
RIDE SAFE
Comment
-
Mine's too is Chinese make by the name "BoGear"Originally posted by amardeep2006 View PostI bough it from ebay for Rs. 377 . This seems Chinese item with brand name SanDing. It contains Total 14 features with default as digital clock. The seller also provided me two spare batteries and mobile screen-card as free gift worth Rs. 100
Rs.307 and got nothing with it other than the cable ties. Looks cool though and I look it up to know the Time most of the times. 14 features here too.
My original plan as mentioned at the starting of the thread was to get a cheap one to experiment how it functions and then go for a good one once I am satisfied.
Now, I am satisfied with it and will use it till its end of life and then go for a better one.
whats the battery type in your gadget?
RIDE SAFEComment
-
@Amardeeep:
yeah I got confused.
I used cable ties and they hold strong. I recommend not to use metallic clamp as they may scratch the paint. also the sensor is small for a hose clamp. try cable ties first and if you are not satisfied go for hose clamp.
RIDE SAFEComment
-
1. The front fork of bullet is too big for cable ties provided with setup.Originally posted by Prakritij View Post
2. I wasted on of the cable tie provided accidentally . It seems irreversible process to untie this thing
I will ask few electrician shop for big size cable tie today.Comment
-
yeah its too small so I used bigger ones
you can get them in the Market...for me, my Friend brought them from his Office
RIDE SAFEComment
Comment