Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us

Castrol Power 1

Learn & practice evasive maneuvers.

Our Partner

Announcement

Collapse
No announcement yet.

Flasher Enabled Head Light Flash for Just Rs.1/-

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Flasher Enabled Head Light Flash for Just Rs.1/-

    The spares required:
    IN 4001 diode -1
    4 CM wire of med gauge

    Tools:
    Soldering Iron of 25W.
    Lead & Flux
    Star head screw driver again depends on the switch gear assy.

    The Circuit:
    Its nothing hifi but routing the power supply through the turn indicator flashing device to the HL wire and there by its flashing

    How:‪P7230010.MP4‬‏ - YouTube
    Do it Yourself, what so ever, if Possible
    -----------------------------------------
    sigpic
    After Market HID Projector Mod for Pulsar 150
    Flasher Enabled Head Light Flash for Just Rs.1/-

  • #2
    DIY Approved
    Happiness is finding you have another Gear left....

    Join xBhp On

    Comment


    • #3
      Gr8 job there... Think it is not applicable for p220f.
      You must be the change you wish to see in the world

      Comment


      • #4
        Very detailed and useful DIY and
        Reminds me of...............
        Long way back I connected the turn signal positive of my friends Bajaj Sunny to its headlamp to see what will happen and couldn't laugh more for more than an hour for irritating the oncoming traffic.

        Comment


        • #5
          Superb DIY

          An excellent and extremely useful DIY as always Sajjt.
          Keep up the good work.

          Some pictures would have been really helpful, please post if possible. I really want to do this DIY ASAP.
          STOP Honking - START Riding

          Comment


          • #6
            I have seen something like this recently, but flashing every 3 to 5 seconds and permanently on that mode, one on a Scorpio who was behind me, damn annoying, second was on an Innova, surprisingly he was using it more sensibly and lastly on a scooter, he had a halogen on low and xenon on high beam, thought the old fellow was cuckoo frantically flashing, then have seen him subsequently and realised it's a permanent fixture.

            Definitely not for the masses! good idea though, sure it has some good use, especially on Ghat sections.
            Beware of Bread, don't say I didn't warn you!
            More than 98 percent of convicted criminals are bread eaters !
            Statistics show that more than 75 % of violent crimes are committed within 24 hours of eating bread !
            Bread is known to be extremely addictive. Subjects deprived of bread and given only water, actually begged for bread after just two days !
            Bread has been proven to kill. Scientists have now uncovered alarming evidence that 100% of the people who eat bread will eventually die !

            Comment


            • #7
              Originally posted by thunderbird_m6 View Post
              Gr8 job there... Think it is not applicable for p220f.
              Thanks

              I am not sure as I'vent come across with these contact less switches. Does it have the wires to make these mods?

              Originally posted by sandeepcf View Post
              Very detailed and useful DIY and
              Reminds me of...............
              Long way back I connected the turn signal positive of my friends Bajaj Sunny to its headlamp to see what will happen and couldn't laugh more for more than an hour for irritating the oncoming traffic.
              Thanks mate, Ha ha.. very true, this was the real inspiration which happened to me years back once I connected the aux lamp relay power wire to the turn switch. If the load its routed through the relay, it will dance properly.

              Originally posted by Omega Man View Post
              An excellent and extremely useful DIY as always Sajjt.
              Keep up the good work.

              Some pictures would have been really helpful, please post if possible. I really want to do this DIY ASAP.
              Tthanks dude, what all details u need? Can u be bit more specific? Its very simple to adopt any one have a general idea in eletrical. Its just because the wire colours and contact points will be different from model to model, hence I didnt post any pics of WIP.
              Do it Yourself, what so ever, if Possible
              -----------------------------------------
              sigpic
              After Market HID Projector Mod for Pulsar 150
              Flasher Enabled Head Light Flash for Just Rs.1/-

              Comment


              • #8
                Great Mod

                Amazing one bro. I was thinking of doing the pass light thing on my activa, but with a switch - push to activate type (like the horn button).

                Will i need a relay or can i wire it directly ?
                30+ YEARS OF RIDING
                1987-93 1990-96 1996-98 2003-05 2003-12 2012-15 2014-19 2015-XX 2020-XX
                Kawasaki Bajaj
                KB-100
                Yamaha
                RX 100
                Yamaha
                RXG
                Scooty
                PEP
                Honda
                Activa
                KTM
                Duke 200
                Activa-i Activa 125 Yamaha R3

                Comment


                • #9
                  Nice mod there. With the flasher rated at 21x2W, how did you use it to flash 2 HIDs + 2 55W halos? Isn't that a bit too much?
                  Your biking tells a lot about the person you are!

                  Comment


                  • #10
                    Originally posted by stefanm View Post
                    I have seen something like this recently, but flashing every 3 to 5 seconds and permanently on that mode, one on a Scorpio who was behind me, damn annoying, second was on an Innova, surprisingly he was using it more sensibly and lastly on a scooter, he had a halogen on low and xenon on high beam, thought the old fellow was cuckoo frantically flashing, then have seen him subsequently and realised it's a permanent fixture.

                    Definitely not for the masses! good idea though, sure it has some good use, especially on Ghat sections.
                    Thats flasher enabled third brake light where once u press the brake pedal the brake light will flash 2-5 times depends on the preset settings and after that it will come to a steady glow like in the normal brake light. This feature will give better visibility/attention about the vehicle moving infront of u and I found its worth to install for places where foggy climate or even on deserted highways to alert the following vehicles.

                    This is what I was reffering to:
                    Blinking Smart Stop - Flashing Brake Light

                    Actually its meant for the third brake light only, but here many have adpoted to all brake lights for a bling factor. And I must admit that am no exception, have done this to my car for a while but the transistors are heating like anything because of the load. Cant ease the load by relays as its a noisy affair in the car.
                    Do it Yourself, what so ever, if Possible
                    -----------------------------------------
                    sigpic
                    After Market HID Projector Mod for Pulsar 150
                    Flasher Enabled Head Light Flash for Just Rs.1/-

                    Comment


                    • #11
                      Originally posted by sajjt View Post
                      Tthanks dude, what all details u need? Can u be bit more specific? Its very simple to adopt any one have a general idea in eletrical. Its just because the wire colours and contact points will be different from model to model, hence I didnt post any pics of WIP.
                      Opened up the LH side switch gear assy of my P220F but it does not match with the connections as advised in your post, hence confused? Will try to figure out the wiring layout. I live off a highway and hence find this really useful.
                      STOP Honking - START Riding

                      Comment


                      • #12
                        Originally posted by Omega Man View Post
                        Opened up the LH side switch gear assy of my P220F but it does not match with the connections as advised in your post, hence confused? Will try to figure out the wiring layout. I live off a highway and hence find this really useful.
                        Can u post the pics?
                        Do it Yourself, what so ever, if Possible
                        -----------------------------------------
                        sigpic
                        After Market HID Projector Mod for Pulsar 150
                        Flasher Enabled Head Light Flash for Just Rs.1/-

                        Comment


                        • #13
                          how should i make both beam lights working at a time while switching to high beam mode, and just low beam on low beam mode...
                          Please provide me with a circuit for the same... will there be any drawbacks???
                          & suggest me a better bulb option.

                          This is my situation...
                          I have a daily night ride of 30kms which includes village roads and highways.. where heavy vehicles are alwayz there to give company, with their high beams and dusts. and a major part of the highway have no road lighting.. uneven wrinkled & pothholed roads at occur at the other hand..
                          so i have to ride with alwayz one hand on my helmet windshields...

                          So am looking for a not a bad option (low finance) that can atleast make me say 'ok' when i ride with my film coated windsheild glass on my helmet closed.
                          Presence of MIND and self CONFIDENCE is the primary aspect You need to be on road, not what brand your riding gears are.
                          If you lack these two then DONT

                          Feel the pleasure of Ultimate Biking
                          __________________________________________

                          . . .
                          alwayzaLive . . .

                          Comment


                          • #14
                            how should i make both beam lights working at a time while switching to high beam mode, and just low beam on low beam mode...
                            Please provide me with a circuit for the same... will there be any drawbacks???
                            & suggest me a better bulb option.

                            This is my situation...
                            I have a daily night ride of 30kms which includes village roads and highways.. where heavy vehicles are alwayz there to give company, with their high beams and dusts. and a major part of the highway have no road lighting.. uneven wrinkled & pothholed roads at occur at the other hand..
                            so i have to ride with alwayz one hand on my helmet windshields...

                            So am looking for a not a bad option (low finance) that can atleast make me say 'ok' when i ride with my film coated windsheild glass on my helmet closed.
                            Presence of MIND and self CONFIDENCE is the primary aspect You need to be on road, not what brand your riding gears are.
                            If you lack these two then DONT

                            Feel the pleasure of Ultimate Biking
                            __________________________________________

                            . . .
                            alwayzaLive . . .

                            Comment


                            • #15
                              Originally posted by ARNandal View Post
                              how should i make both beam lights working at a time while switching to high beam mode, and just low beam on low beam mode...
                              Please provide me with a circuit for the same... will there be any drawbacks???
                              & suggest me a better bulb option.

                              This is my situation...
                              I have a daily night ride of 30kms which includes village roads and highways.. where heavy vehicles are alwayz there to give company, with their high beams and dusts. and a major part of the highway have no road lighting.. uneven wrinkled & pothholed roads at occur at the other hand..
                              so i have to ride with alwayz one hand on my helmet windshields...

                              So am looking for a not a bad option (low finance) that can atleast make me say 'ok' when i ride with my film coated windsheild glass on my helmet closed.
                              Its not a big deal for ZMA. Same theory of flashing applies here too. I guess ZMA uses relays for head lights. Put a 1A diode from high beam switching point to low beam switching point like in the pass light option. U r done. If there's no relay, the diode will heat up and soon will conk off due to the load, so if its heating up during the usage, replace with a 6A one.

                              I hope this clear.
                              Do it Yourself, what so ever, if Possible
                              -----------------------------------------
                              sigpic
                              After Market HID Projector Mod for Pulsar 150
                              Flasher Enabled Head Light Flash for Just Rs.1/-

                              Comment

                              Working...
                              X