Changing stock pilot lamps to LEDs
Pulsar 200NS uses 5W, 2No.s pilot bulbs in the "gotee" style arrangement. Though the stock bulbs looks fine, LEDs look even more "uber" cool and save some watts here and there. So here we go.
(1) Pulsar 200NS have the most easy access, pilot and head lamp arrangement. Locate the Pilot bulbs on the either side of the head assembly.

(2) Pull the rubber socket out, be careful not to pull by the wires.

(3) The replacement LED should be "wedge" type. It's easily, available at the shops or online.

(4) Pull the stock bulb out and stuff the LED in the socket. LED will only glow, if they are inserted in correct polarity. So, In case the LED doesn't glow, just try removing the LED and inserting back by changing the side of the wedge.

(5) Switch on the bike and the lights, and check if the LEDs are glowing.

(6) Push the rubber plugs back into socket, firmly into place. Make sure it remains water tight.

(7) Tada!

LEDs at Night

Comment