Tweet
My 1st DIY attempt For CBR250R Tyre huger for Ninja 250R so here it goes
1) Get a CBR 250r Huger from near by Honda spare parts shop ... it cost around 940+tax (CF type Normal one cost around 150rs)
2) Remove Left side passenger footrest using Allen key from bike tool kit
3)Cut out the excess part shown in the pic using axoblade and put a hole using a small drill and smoothen off the edges using a sandpaper
4)Remove the stock Chain cover using a spanner from the tool kit
5)Place the Modified huger on to the bike
6) Make a hole on the right side of the huger so that you can use it to secure the right side of the huger to swing-arm
7) Buy 1" aluminium plates about 50cm form any hardware shop and bolt or screw to secure it to the swing-arm and put a hole accordingly using a drill
8)Secure all the bolts tightly
and paint the aluminium plates mat-black
Here is the pic of the finished product
There is more than enough gap between Tyre and the huger from every side and the total cost of the huger is Rs-1040 /-
Total cost of the huger = Rs -1040 Including every thing
Hope you guys like my small DIY and find it helpful ... please tell me any good suggestion to improve my work ....
1) Get a CBR 250r Huger from near by Honda spare parts shop ... it cost around 940+tax (CF type Normal one cost around 150rs)
2) Remove Left side passenger footrest using Allen key from bike tool kit
3)Cut out the excess part shown in the pic using axoblade and put a hole using a small drill and smoothen off the edges using a sandpaper
4)Remove the stock Chain cover using a spanner from the tool kit
5)Place the Modified huger on to the bike
6) Make a hole on the right side of the huger so that you can use it to secure the right side of the huger to swing-arm
7) Buy 1" aluminium plates about 50cm form any hardware shop and bolt or screw to secure it to the swing-arm and put a hole accordingly using a drill
8)Secure all the bolts tightly
and paint the aluminium plates mat-black Here is the pic of the finished product
There is more than enough gap between Tyre and the huger from every side and the total cost of the huger is Rs-1040 /-
Total cost of the huger = Rs -1040 Including every thing
Hope you guys like my small DIY and find it helpful ... please tell me any good suggestion to improve my work ....
Comment