Greetings to fellow ridersnot so professionalItems needed-

1. Two 12-v Electronic Indicator buzzers. (Around 20 rupees each)
2. Wire tape
3. Wire stripper or Pencil blade.

Procedure-

Step 1 - Right Hand Side - Front Indicator

Step 2
Pull out the wires. Be careful not to cut or pull off any wire connection, be gentle.



Step 3
Find the wire, which connects the indicator to the circuit.



Step 4
You will find a white plug-in type socket to which your indicator wires are connected. The side to which the indicator wires are connected will look like this.



Step 9
Push all the wires inside the headlight casing to their previous position and gently slide in the buzzer. Dont place the buzzer too deep inside the casing as it will make it less audible and also make sure that it wont fall off while riding.



Step 10
Repeat this procedure on the Left Hand Side - Front Indicator with the second buzzer.

Step 11
Put the bike in centre stand and turn the handlebars from left to right as many times to ensure free play. ( misplaced or tangled wires or buzzers will restrict handlebar movement ).

Now you have installed the Indicator/ Flasher buzzer on your BULL . I just did this a day ago and is working fine for me.

Pardon me once again for my low-technical slangs.

Ride Happy - Ride Safe. Greetings.