Query approved.

Its easier when you remove tank and then the inner fairing ... Lock ... not exactly there but yes understand that the inner fairing is under the outer fairing the part where the screws go through ... So you have to bend the inner faring such that it comes out from under the outer fairing .... start from the top ...

Tried that. but the fairing pieces refused to come out. So to avoid breaking it, stopped the attempt, until I get clear instructions.

kochu

go to a pbk showroom and get it fixed by experts, the p220f is known for it's fairing, it will be sad if you break it while trying to "fix" it. And if you're hell bent on removing the fairing why not remove the whole fairing and fix a fz type headlight?? just a thought!

@kochumvk

hey wats da price of low beam bulb ? My p220's low beam got fused today

best way is to remove the frame with fairing ,it prevents scratches.
i removed fairing from my p220 ,heres the procedure i followed
1.remove the screws on upper side (around the petrol tank)
2.remove the plastic visor on doom.
3.remove number plate and then the plastic sheet that is located at bottom of the fairing.
4.remove the rear view mirrors.
5.now look underneath, remove screws fixed at bottom of fairing near the "f"logo.
6.remove the 2 big screws ,which are seen together (as you look down on front forks while sitting on the bike).
7.right below the headlamp there a 2 big screws,remove them too.
8.look carefully in the space betwen the fairing and petrol tank ,there is a nut ,remove it.
9.deattach the wire plugs (hidden in hollow rubber casing)
10.deattach head lamp assembly from fairing.

i know it late to reply,but i hope it helped you.