Query Approved

Dear Pls make sure one thing.I am trying to help u out with my experience only..so things may or it may not be..so pls make always discussion with a mechanics...Pls note below,

1. engine sound very harsh....Check-1-Engine oil,2-Check the gear TEETH n panion,3-Piston Ring Check
2. jerk during every clutch apply and release time....1.Check the clutch cable 2. male sure that clutch plate in it's position right.
3. gear changing is hard....-I think the no 1 update will help u out.
4. overheating after just 3 kms..-Clutch set Problem.
5. while applying front disc it makes one rubbing sound...The o-ring & piston of the disk bucket is not working.
6. performance is very very low after engine overheated...I think your clutch sec is totally in bad shape..so this thing happens..

pls try to cure this thing .So hope your byk will fly in the road..

The first problem is down to your perception, and it may help if you explain more to its nature, ie where a particular sound is coming from.
The second and third problem can be attributed to the clutch housing wear and tear, and worn out plates, which results in difficulty in changing gears, (my Fazer developed this problem after 10k kms of odo) and this is a common issue in FZs, the clutch plates get worn out regularly, try to get them change or check the housing and your clutch wire for and slop or slippage.
Improper Lubrication results in overheating, get your engine oil levels checked.
The sound that comes from the front disc of the FZ16 is common among all FZs, and it will be better if you ride another FZ to double check this out.
Frem what i think the performance drops in an overheated engine as the piston tends to stick to the cylinder sides, resulting in the loss of efficiency (mech advantage).
It would be quite helpful if you give us the odo reading of your bike,
NO, if you have ridden the bike sanely in it's run-in period, i.e no sudden accceleration or high rpm revving, the bike should run fine.