Tweet
After my recent Thread in the "What Bike?" Section, I have been adviced and accordingly have decided to wait for the New iterations of the Pulsars.
However, my current bike would not be sold, rather handed over to a cousin of mine (I can't bear to lose my first bike). He's a young chap and would definitely like a little more performance.
I am thinking of the Following Mods.
NOTE : The Engine Chamber of my bike looks Similar to the P150 from outside, so, I am under the impression that Mods to the P150 can be taken as a reference when doing it to mine. (I might be thinking like a fool here)....
1) Better Braking. This is one thing where the Discover fails big time.
Planning to get the Disk Brake Setup from the P150 (Silver colored wheels and shocks).
I believe I would need the following things.
> Alloy wheel from P150 supporting Disk Brake Setup.
> The Disk Brake Kit (Brake pads, Mounts, Disc).
> Shock Absorbers which have the mounting points for the Disk pads.
> Anything else? (I don't know)
2) Engine Rebore to 135 or 150 cc. I think for the 135, the Disc.135 Piston and other things can be used.
3) My rear shocks have taken a huge beating on my Parli Trip and I would be replacing them. However, in a dilemma whether to replace them with the normal SnS suspension or the new Nitrox ones.
4) K&N Filter, if any along with the upjetting.
Also, is there any competent Mechanic that someone can guide me to in Hyderabad to perform the above tasks ?
Looking for advice and suggestions from all the experts.
Thanks in advance.
However, my current bike would not be sold, rather handed over to a cousin of mine (I can't bear to lose my first bike). He's a young chap and would definitely like a little more performance.
I am thinking of the Following Mods.
NOTE : The Engine Chamber of my bike looks Similar to the P150 from outside, so, I am under the impression that Mods to the P150 can be taken as a reference when doing it to mine. (I might be thinking like a fool here)....
1) Better Braking. This is one thing where the Discover fails big time.
Planning to get the Disk Brake Setup from the P150 (Silver colored wheels and shocks).
I believe I would need the following things.
> Alloy wheel from P150 supporting Disk Brake Setup.
> The Disk Brake Kit (Brake pads, Mounts, Disc).
> Shock Absorbers which have the mounting points for the Disk pads.
> Anything else? (I don't know)
2) Engine Rebore to 135 or 150 cc. I think for the 135, the Disc.135 Piston and other things can be used.
3) My rear shocks have taken a huge beating on my Parli Trip and I would be replacing them. However, in a dilemma whether to replace them with the normal SnS suspension or the new Nitrox ones.
4) K&N Filter, if any along with the upjetting.
Also, is there any competent Mechanic that someone can guide me to in Hyderabad to perform the above tasks ?
Looking for advice and suggestions from all the experts.
Thanks in advance.
Comment