Announcement

**jbm_guy** · 10-01-2015, 12:12 PM

Re: Pulsar 200 NS mods and Extras

Originally posted by priyank.shishodia View Post

no the alloy wheel is ok, the mechanic removed the tyre and used sand paper and rubbed it at the walls of the tyre and rim and now it is ok, i had it done about 1500kms also, what could be the problem? and will the reversed axle cause any problem? any other alternative to michelin like fzs tyre? cause michelin pilot street not available here in ghaziabad.

You can try MRF Revz, zapper is not great.

SnapDeal.com - 404 – Page not found

http://www.snapdeal.com/product/mrf-2-wheeler-tyres-revz/837367515

This is what used in Fz.

But remember, a bigger rear might make the bike look ugly or beefier. Also more prone to punctures and the bike will suffer from acceleration(slightly). So think twice before changing to a bigger profile.

**priyank.shishodia** · 10-01-2015, 08:18 PM

Re: Pulsar 200 NS mods and Extras

Originally posted by jbm_guy View Post

You can try MRF Revz, zapper is not great.

SnapDeal.com - 404 – Page not found

http://www.snapdeal.com/product/mrf-2-wheeler-tyres-revz/837367515

This is what used in Fz.

But remember, a bigger rear might make the bike look ugly or beefier. Also more prone to punctures and the bike will suffer from acceleration(slightly). So think twice before changing to a bigger profile.

i am asking about the front one not the rear one, please tell me the front one and please tell that the reversed axle nut would cause any problem?

**Aurobindo** · 03-12-2016, 07:00 PM

Re: Pulsar 200 NS mods and Extras

Well finally most of the mods on my bike are done.

Mods Done on Pulsar 200NS
--------------------------------------
1). USB Charger & Mobile Mount Bar and accessories. Placement for switch was also marked.
2). Custom made luggage carrier rack (Rear). Photos not posted as i am still adding the finishing touches on it.
3). 2XFog Lamps - 35W Total Power.
4). Dual horns from Hella
5). 2XDRLs

Missing: [ Needs to be done ]
--------------------------------------
1). Larger Windscreen
2). Crash Carriage

**Aditya sharma516** · 03-13-2016, 01:40 AM

Re: Pulsar 200 NS mods and Extras

Originally posted by Aurobindo View Post

Well finally most of the mods on my bike are done.

Mods Done on Pulsar 200NS
--------------------------------------
1). USB Charger & Mobile Mount Bar and accessories. Placement for switch was also marked.
2). Custom made luggage carrier rack (Rear). Photos not posted as i am still adding the finishing touches on it.
3). 2XFog Lamps - 35W Total Power.
4). Dual horns from Hella
5). 2XDRLs

Missing: [ Needs to be done ]
--------------------------------------
1). Larger Windscreen
2). Crash Carriage

[ATTACH]206872[/ATTACH]

[ATTACH]206873[/ATTACH]

[ATTACH]206874[/ATTACH]

[ATTACH]206875[/ATTACH]

[ATTACH]206876[/ATTACH]

Hi, can you please tell me how to connect usb charger to ignition switch in pulsar 200 ns. Thank you.

**Aurobindo** · 03-13-2016, 10:26 AM

Re: Pulsar 200 NS mods and Extras

Originally posted by Aditya sharma516 View Post

Hi, can you please tell me how to connect usb charger to ignition switch in pulsar 200 ns. Thank you.

There are 2 ways to do it. Connect a switch/Do not connect a switch. My USB cable is not connected via a switch. The wires have been connected directly with the ignition wires. So everytime u turn to key to " on" , it gets activated. If the key is not turned the USB wont power up. Same logic has been applied on the Fog Lamps setup too.

**Aditya sharma516** · 03-13-2016, 11:12 AM

Re: Pulsar 200 NS mods and Extras

Originally posted by Aurobindo View Post

There are 2 ways to do it. Connect a switch/Do not connect a switch. My USB cable is not connected via a switch. The wires have been connected directly with the ignition wires. So everytime u turn to key to " on" , it gets activated. If the key is not turned the USB wont power up. Same logic has been applied on the Fog Lamps setup too.

Please post an image of that connection. I have been trying for days to connect. An image of that connection will be very helpful.
Thank you.

**Sherl** · 03-14-2016, 10:07 AM

Re: Pulsar 200 NS mods and Extras

Originally posted by Somersault View Post

Yes, I will suggest for Michelin Pilot street for this profile. No damage, a slight increase in the ride height which in turn provides slightly better cushioning. However, if you are upsizing, it's advisable to upsize both the tyres else the level of grip will not be consistent & wet weather performance will be horrible. Slightly pricey but worth every single rupee.

Source : I'm using them since the 3rd day of the purchase of my NS. Excellent grip level in cornering as well straight line braking performance. Never had a puncture in last one year as this tyre is a steel belted radial (like good quality car tyres), unlike CEAT or MRF which are nylon radials and puncture prone.

Good luck with your purchase !!

Mind elaborating a bit?

I am riding stock eurogrips but planning to upgrade to increase the bike height. Would rear upgrade to michelin 140/70 wouldn't do the job?
This one Michelin - Pilot Sporty - 140-70/17 66P - TubeLess: Buy Michelin - Pilot Sporty - 140-70/17 66P - TubeLess Online at Low Price in India on Snapdeal

Also any idea to dispose stock eurogrips? I have covered 4400 kms in them. Thats it!

**Aurobindo** · 03-15-2016, 12:14 PM

Re: Pulsar 200 NS mods and Extras

Originally posted by Aditya sharma516 View Post

Please post an image of that connection. I have been trying for days to connect. An image of that connection will be very helpful.
Thank you.

Give me time till Sunday of this week. Will post detailed images.

**Aditya sharma516** · 03-16-2016, 02:22 PM

Re: Pulsar 200 NS mods and Extras

Originally posted by Aurobindo View Post

Give me time till Sunday of this week. Will post detailed images.

Thanks a lot. I Will be waiting for it.

**Aditya sharma516** · 03-21-2016, 11:25 AM

Re: Pulsar 200 NS mods and Extras

Originally posted by Aurobindo View Post

Give me time till Sunday of this week. Will post detailed images.

Hi
Just a friendly reminder, please post those connection pics. Thank you.

**Aurobindo** · 03-21-2016, 04:00 PM

Re: Pulsar 200 NS mods and Extras

Aditya, my mechanic is not in town presently. He Will be back on second week of April. Will get back to you at that time.

**Aditya sharma516** · 03-21-2016, 06:42 PM

Re: Pulsar 200 NS mods and Extras

Originally posted by Aurobindo View Post

Aditya, my mechanic is not in town presently. He Will be back on second week of April. Will get back to you at that time.

Oh ok. Please don't forget. 😊

**a_poor_blind_kid** · 04-03-2016, 05:38 PM

Re: Pulsar 200 NS mods and Extras

Few pics of my 200cc "Faithful 2.0"

1: KTM Knuckle guards = Already proved their worth..Saved my knuckles from a BEST bus that brushed real close to me in the crazy Bombay traffic

2: Pulsar AS + Pulsar RS windshields = Much better stability on highways

3: Rear view mirrors with integrated side indicators

4: Red led pilot lights

Ride safe

Attached Files

**Ankitsingh007** · 04-04-2016, 09:58 AM

Re: Pulsar 200 NS mods and Extras

Originally posted by Kiran200NS View Post

Hey guys

If any of you guys want to make an engine gaurd for your beast not only pulsar 200ns but also any other bike kindly contact me

I have put a pic of one of the xbhp member who made himself a engine gaurd by contacting me

I courier the engine gaurd itself to ur place

Don't wait long!!!

Sent from my A0001 using xBhp Connect mobile app

----consecutive posts auto-merged-----

This is my very own beast with the engine gaurd

[ATTACH=CONFIG]174643[/ATTACH]

And can you tell the installation process?
I mean like do we have to weld it or something ?

**Anubhav M** · 04-05-2016, 09:01 PM

Re: Pulsar 200 NS mods and Extras

Originally posted by Ankitsingh007 View Post

And can you tell the installation process?
I mean like do we have to weld it or something ?

I am looking for an engine guard as well for my AS200

Announcement

Pulsar 200 NS mods and Extras

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment