Tweet
Recently I have changed the front tyre of my hunk, change my clutch plate and adjusted front shock absorber. When my bike goes 55 above then my bike's handle starts jerking a lot and wobble.....what could be the problem?
-
-
Query approved.(Been There Done That) x 3.25
-
What do you mean by 'adjusting the front shock'? Most probably the tyre bead has not seated properly in the rim.Originally posted by rubaby View PostComment
-
Are you feeling jerks or only mild vibrations??Originally posted by rubaby View PostThose who wish to control their own lives and move beyond existence...Ride a Bike :)
Work to Eat. Eat to Live. Live to Bike. Bike to Work.
FB: https://fb.me/palpavan
Group : https://fb.me/nomahawktourersComment
-
A quick check - the direction arrow specifying the tyre rotaion directions is correct?
What adjustment you made to front forks? oil change?Comment
-
Due to an accident the bike's front two rods connected to the front shock absorbers alignment had some problem. The bike used to lean in one direction when brake was applied. The mechanic claimed that fixed the alignment. And I changed the front tire as well. After that this strange problem raised. the bike only starts wobbling when the speed is above 50 kmpl and again the jerking reduces when crossed 90 kmpl. I am very dumbfounded. Plz help.
Comment
-
Did you check if the tyre bead is seated properly in the rim, all around?Originally posted by rubaby View PostDue to an accident the bike's front two rods connected to the front shock absorbers alignment had some problem. The bike used to lean in one direction when brake was applied. The mechanic claimed that fixed the alignment. And I changed the front tire as well. After that this strange problem raised. the bike only starts wobbling when the speed is above 50 kmpl and again the jerking reduces when crossed 90 kmpl. I am very dumbfounded. Plz help.Comment
Comment