Tweet
My front tyre wear is uneven and the local mechanic suggested that the shocks might have a bend.Few years back i had trued them. Last last i replaced oil seals at least 3 times.I am thinking of changing the fork tubes altogether. i was wondering if New Pulsar180 fatter front shock absorbers could be fitted onto my 2004 pulsar 150. Can this be done??
-
2004 Pulsar 150 DTSi -
Topic Approved.
To install this big fork setup on my Pulsar 180 UG3 (2007), I checked with a mechanic and he refused.
Then, I visually checked myself too, examining both my Pulsar 180 UG3 and the P180 UG4 with the big front forks visually. Tried finding matching parts or sizes.
And I remember that I couldn't find a way to get them installed. Something didn't quite match up.
Now this was just visual guess work, so I'm not too sure about this.---
Brotherhood, Rules, Freedom. Xbhp.
Indian riding = Alertness, Anticipation and Adjustment. -
Thanks for the approval.
If the part where the T stem mates with the chasis is the same in both the models it should be possible right? replace the T stem+Fork+Cone set?. Can anyone throw light on this?2004 Pulsar 150 DTSiComment
-
Although am not sure. But I think we can get this part in Bajaj SVC. Will check on the internet, if anything comes up will post here.
Check this link - http://chennai.olx.in/pulsar-150cc-f...-iid-258633941. A guy from chennai wants to sell the front forks for P150. However, chances are less since the advert was posted in 2011. but do give a try. who knows.
Front fork size for P150 - 120MM. http://www.bcmtouring.com/imp/Pulsar...hop_Manual.pdf.
Ride Safe
Vrooom VroooomComment
-
The following link is for - Information on Spare parts - bajaj.
Bajaj
Afellow biker from bcmotoring also posted the bajaj spare parts list . check this link as well, BAJAJ PULSAR SPARE PARTS LIST. for prices all you have to do is 'multiply H.E.T (X) 3.85.
Ride Safe
Vrooom VroooomComment
-
Originally posted by IronHide Shetty View PostAlthough am not sure. But I think we can get this part in Bajaj SVC. Will check on the internet, if anything comes up will post here. - Thanks
Check this link - ! ! ! PULSAR 150CC FRONT FORK SET WITH DISK MACHINE AND LEVER ! ! ! - Chennai - Moving & Clearance Sale - Porur. A guy from chennai wants to sell the front forks for P150. However, chances are less since the advert was posted in 2011. but do give a try. who knows. - If at all i cant fit the fatter forks il go for new ones. Thanks for suggestion nonetheless
Front fork size for P150 - 120MM. http://www.bcmtouring.com/imp/Pulsar...hop_Manual.pdf.- Would be great if fork size of pulsar 180/220 was knownOriginally posted by IronHide Shetty View PostThe following link is for - Information on Spare parts - bajaj.
Bajaj -Its customer care
Afellow biker from bcmotoring also posted the bajaj spare parts list . check this link as well, BAJAJ PULSAR SPARE PARTS LIST. for prices all you have to do is 'multiply H.E.T (X) 3.85.
-Thanks for the link
My replies in bold.2004 Pulsar 150 DTSiComment
-
For Pulsar 220 - its 130 mm and for Pulsar 180 - its 120mm (according to the manual).
Ride Safe
Vrooom VroooomComment
-
Originally posted by RascalAngel View PostOriginally posted by RascalAngel View PostOriginally posted by IronHide Shetty View PostFor Pulsar 220 - its 130 mm and for Pulsar 180 - its 120mm (according to the manual).
There is no way of putting a new gen 180's front end in to a 150. The new 180 has the same chassis as the 200/220 thus uses a 200/220 t stem also. which is much thicker and longer thus uses different steering head bearings also.
It can be done with some radical alterations as I am doing on my RD, however it would be better to go with the new 150 set up with the clip ons.
The 220 has a fork dia of 37mm and travel of 135mm. It should be the same with the new 180.HYPERTHRUST CLEARED AND COUNTING
5.....4.....3....2.....1
sigpicComment
Comment