Thread Approved

I tried to buy this 3M Wrap for my Laptop.
after seeing this video
DINOC 3M Carbon Folie - Acer Laptop - Motorsticker - YouTube

But couldn't find the right materials at local sticker shop

now this is available at Ebay

3D Carbon Fiber Vinyl Sticker black textured sheet car bike graphics uber cool | eBay

It will be a great MOd or DIY

Still Cheaper one available.

best to put 2-3 coats of clear over the vinyl, this will give you gloss and the vinyl will last very long.

Thanks you buddy ,I am now inspired to try this DIY for my baby duke

Nice ..cool and how long does it take for the clear coat to dry?

Thanks for the Approval Admin
New on Xbhp And I Love xBHP #Inspired By All of you

thanks, i will try these on my pulsar, any installation instructions...?

can we cut them with normal scissors ..??

how to paste them.. ??

and "its better to apply a few coats of clear coat".. means... paint...??

and what is the difference between 299 rupees one and 99 rupees one, apart from size of sheets.

Re: Need Some Information On Carbon Fiber Wraps.

How to paste it on the surface ?

----consecutive posts auto-merged-----

How to paste it on the surface ?

Re: Need Some Information On Carbon Fiber Wraps.

Clear coat on vinyl?? [emoji15]

Re: Need Some Information On Carbon Fiber Wraps.

I have come here to resolve all the problems you will be facing with this 3D Carbon Fiber Vinyl Sticker, First and foremost thing after receiving this Vinyl is to clean your bike completely by getting a diesel wash and make sure every part of the bike is extremely clean, no dust, no oil marks or oil, then apply a tin coat of clear this is just to protect the Paint from Vinyl Sticker Damage when removing Vinyl in any case. After applying the coat it drys in around an hour to two hours depending on the thickness of the coat. If you have a new bike or already coated your bike before then this step don't apply to you. After the cleaning the bike cut the vinyl into a design or if you are covering the bikini faring make sure the design or the sticker is enough for the use you are looking for. Then just take off the sticker and use a comb or a vinyl applicator and slowly rip the sticker and by using the comb press it hard enough for it to stick and doesn't create any air bubbles.. if you get any air bubbles remove it asap by using the comb to air out the air bubbles out the sticker and that's it. You do not need any more coating on the vinyl since the vinyl is water proof, dust proof and the color on it lasts around 1 year to 5 years depending on the quality of the vinyl sticker.. So if you are looking to keep the sticker for a long time I suggest you go for highest quality of vinyl sticker and make sure to ask them about how long the color will last on the sticker. Other then that have a happy stickering job.