Hi Guys,

I have P180 UG4 and I drive it mainly in city. While going to office I need to stop on number of red signals and some of them are large ones and with large ones I mean those signals remain close for around 3-4 mins and on such signals I put my bike on neutral but putting it to neutral is very difficult, when I push gear pedal down it goes down to first gear and when I pull pedal up it again comes to up gear. To put it to neutral I always need to switch off the engine and only then it gets neutral.

Not sure if this is the normal behavior of Pulsar or is it only mine which showing this problem and should I take it to service center.