Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us

Castrol Power 1

Always wear a helmet.

Our Partner

Announcement

Collapse
No announcement yet.

sp125 bs6 missing issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • sp125 bs6 missing issue

    Hello,
    I had bought sp125 bs6 model a few years back which is now at 45k. All the services have been done periodically at Honda service station (had to visit multiple service stations due to pathetic service provided by Honda in Hyd) now the issue is my bike is jerking and having acceleration problem to which i had watched several videos on YouTube from which i have changed all the filters such as air oil and fuel also asked them to clean throttle body to which the service center denied at first but later said its done (i highly doubt it) so what could be the issue?
    Mechanics near my area are not touching bs6 models so have to visit service centers for it but they dont listen to customers at all.
    Ps:My bike was kept with honda on last service for 1 and half month to no avail returned the bike in worse state than it was but couldn't solve the problem could anyone guide me to a good mechanic near abids hyd who can work with bs6 models? Thanks

  • #2
    Topic Approved.

    Comment


    • #3
      Hi eminem4ever,
      Please clean throttle body, fuel injector. Also, replace spark plug and make sure you clean your fuel tank and replace the fuel filter, air filter.
      Make sure you clean the ignition coil.
      ​​​​​​

      Let me know if this helps.

      Thanks
      Niranjan

      Comment


      • #4
        A clogged or dirty fuel injector can cause jerking and poor acceleration. Although the service center claimed to have cleaned the throttle body, the injector may not have been properly checked. It may be helpful to check if the injector is working properly and if the fuel pressure is correct.​
        Last edited by avensis; 11-25-2025, 04:07 AM.

        Comment

        Working...
        X