Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us

Axor
Magazine
Castrol Power 1

Keep your helmet tightly strapped up.

Our Partner

Announcement

Collapse
No announcement yet.

USB charging in Pulsar 200ns

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    USB charging in Pulsar 200ns

    HI,
    Can someone please explain how to connect USB charger to Pulsar 200ns IGNITION SWITCH?
    I have esmart ACCUCHARGER for bike, bought from Amazon.
    Thank you.
    Tags: None
  • #2
    Re: USB charging in Pulsar 200ns

    Topic Approved. Moved from News to Help Section.

    Welcome to Xbhp brother. Please take time to identify the sections in Xbhp and post accordingly... Check this link to see all sections: www.xbhp.com/talkies/

    Well, you have to attach it to any terminal that passes direct current from the battery, but only after ignition turns on (key is switched to on). Which means it must be around the ignition/ console itself. A P200 NS owner will be able to pinpoint where it is, preferably by a picture... @princesirohi

    Since it says 12 to 20 volts DC as input, you can use it directly on the battery too, but keep it connected via an On/Off switch so that it doesn't drain the battery all the time... Even if you don't charge a phone, it WILL DRAIN THE BATTERY. So, it should be off when not in use, ok?
    And, remember, you have to get the +, - poles right, since it mentions DC as input. Refer to the box/ user manual for more info on this.


    Please note: I have not used the charger myself, I'm just joining facts from what I see here:- Smart E Accucharger Usb Bike Charger: Amazon.in: Car & Motorbike
    Last edited by Samarth 619; 03-12-2016, 04:48 PM.
    ---
    Brotherhood, Rules, Freedom. Xbhp.
    Indian riding = Alertness, Anticipation and Adjustment.

    Comment

    • #3
      Re: USB charging in Pulsar 200ns

      Originally posted by Aditya sharma516 View Post
      HI,
      Can someone please explain how to connect USB charger to Pulsar 200ns IGNITION SWITCH?
      I have esmart ACCUCHARGER for bike, bought from Amazon.
      Thank you.
      Connect the red wire to the rear brake switch's positive line and earth the black earthing wire to the chassis somewhere, by stripping the paint.

      Sent from my XT1033 using xBhp Connect mobile app
      HYPERTHRUST CLEARED AND COUNTING
      5.....4.....3....2.....1
      sigpic

      Comment

      • #4
        Re: USB charging in Pulsar 200ns

        Originally posted by Bibhu View Post
        Connect the red wire to the rear brake switch's positive line and earth the black earthing wire to the chassis somewhere, by stripping the paint.

        Sent from my XT1033 using xBhp Connect mobile app
        If i do that, the charger will only work when I ve the lights on right?
        I want the charger to work when I turn the key to ignition and even after the engine starts running.
        Thank you .

        Comment

        • #5
          Re: USB charging in Pulsar 200ns

          Originally posted by Samarth 619 View Post
          Topic Approved. Moved from News to Help Section.

          Welcome to Xbhp brother. Please take time to identify the sections in Xbhp and post accordingly... Check this link to see all sections: www.xbhp.com/talkies/

          Well, you have to attach it to any terminal that passes direct current from the battery, but only after ignition turns on (key is switched to on). Which means it must be around the ignition/ console itself. A P200 NS owner will be able to pinpoint where it is, preferably by a picture... @princesirohi

          Since it says 12 to 20 volts DC as input, you can use it directly on the battery too, but keep it connected via an On/Off switch so that it doesn't drain the battery all the time... Even if you don't charge a phone, it WILL DRAIN THE BATTERY. So, it should be off when not in use, ok?
          And, remember, you have to get the +, - poles right, since it mentions DC as input. Refer to the box/ user manual for more info on this.


          Please note: I have not used the charger myself, I'm just joining facts from what I see here:- Smart E Accucharger Usb Bike Charger: Amazon.in: Car & Motorbike
          Thank you for the info.
          Can u please find out more about how to install it to the ignition switch? I have been trying a lot and I don't want to connect it to the battery directly.

          Comment

          • #6
            Re: USB charging in Pulsar 200ns

            Originally posted by Aditya sharma516 View Post
            If i do that, the charger will only work when I ve the lights on right?
            I want the charger to work when I turn the key to ignition and even after the engine starts running.
            Thank you .
            No. The charger will work whenever the key is turned on. In a brake switch the negative or earthing point acts as the switch. The positive wire stays charged untill the key is on. It is safer to connect it to the brake switch because if, god forbid, shorting happens it would be easier to work on.

            Sent from my XT1033 using xBhp Connect mobile app
            HYPERTHRUST CLEARED AND COUNTING
            5.....4.....3....2.....1
            sigpic

            Comment

            • #7
              Re: USB charging in Pulsar 200ns

              I did the connection a day back on my NS. The guy who did it was a expert on wiring and electrical. Hardly took him 15 min to set it up. He didn't connect it to battery directly, he connected it to the wires with ignition. Once the key is turned on the charger gets active

              .

              Love ur Ride and keep it maintained, its what brings u safely back to home

              Comment

              • #8
                Re: USB charging in Pulsar 200ns

                Originally posted by Aurobindo View Post
                I did the connection a day back on my NS. The guy who did it was a expert on wiring and electrical. Hardly took him 15 min to set it up. He didn't connect it to battery directly, he connected it to the wires with ignition. Once the key is turned on the charger gets active

                .

                Can u please post an image of that connection?

                Comment

                • #9
                  Re: USB charging in Pulsar 200ns

                  Connect with parking light wire.. It will work like on/off button.

                  Comment

                  • #10
                    Re: USB charging in Pulsar 200ns

                    Originally posted by royal racer View Post
                    Connect with parking light wire.. It will work like on/off button.
                    Originally posted by Aditya sharma516 View Post
                    HI,
                    Can someone please explain how to connect USB charger to Pulsar 200ns IGNITION SWITCH?
                    I have esmart ACCUCHARGER for bike, bought from Amazon.
                    Thank you.
                    Hi guys, I wanted to buy Accucharger for my fz16. Can u please tell me wheater it fits to the bike or not. And please explain me how to install it. Thank you in advance.
                    I did search a lot to get this thread. I'm new to xbhp. Help please.. 😊

                    Comment

                    • #11
                      Re: USB charging in Pulsar 200ns

                      Originally posted by Aurobindo View Post

                      .

                      can you please upload some more pics of the rod between the handlebar. is that of PVC pipe or a metal bar?

                      Comment

                      Previous template Next
                      Working...
                      X
                      © xBhp.com 2026. All rights reserved.
                      Designed by xBhp