Hello everybody. Today i am posting my first post and i need advice about removing the PAV system from my bullet electra 5s ci engine 2008 model. Actually i dont have any problem with this PAV unit but because of it the position of airfilter box remains backside bend. If we see there is a extra piece fitted between the carburettor and inlet manifold which makes the position of airfilter box bend back side and it doesnt looks good. Now If this extra piece which belongs to the pav system is removed, the airfilter box will remain in straight position. That's why i want to remove the entire PAV unit. But the main problem starts here. I don't know exactly what should be done with carburettor. I did some research and it says that carburettor setting is needed after removing the PAV unit so that engine doesn't runs too lean or too rich. Some people say that airfuel screw adjustment is enough while others say that main jet and pilot jet has to be changed. I am totally confused about what to do. pls somebody with good knowledge about this help me.