Pulsar 180 modification help needed

Hi xbhpians

I am planning to modify my bike, pulsar 180 ug-IV. I am doing these modification to eliminate the problems I am facing with my bike.

Problems:
1) Front suspension fork oil leak(heavy, oil on discs)
2) engine oil leak from crank case
3) cylinder head one valve not working
These are the major problems I am facing so I am doing below modifications. Please helpme know whether it's possible or will it compromise the chassis.

Modifications:
1)USD front and gull arm swing arm rear suspensions
2)pulsar 220f complete engine with old radiator and fuel injection system

Please if anyone knows any pulsar has any of these modifications done? Please let me know.

Monk sir please approve this post.



Sent from my ONEPLUS A3003 using xBhp.com mobile app

Re: Pulsar 180 modification help needed

Query approved.

Re: Hazard light installation

I think for that u need a good modification professional who can manage and add stuff to your bike find a shop who modify bike .. i hope it will help

Sent from my Redmi Note 3 using xBhp.com mobile app

Re: Hazard light installation

We have lot of shops here who modifies but the problem is the parts. They said they don't have USD and swing arm. So if anyone has any idea where I can get them.

Sent from my ONEPLUS A3003 using xBhp.com mobile app

Re: Hazard light installation

For the upside down forks you can use we see on KTM Duke's, they are the cheapest option, but you have to struggle with brakes compatibility issues.
For the swingarm u can use from 200 ns, fz, Apache 200. Again the issue would be the brakes.
The best option would be to change rims as well to solve compatibility issues with brakes and swingarm. You could use rims of 200 ns and front suspension of KTM Duke, they would be compatible.