Announcement

**desideep** · 05-02-2009, 03:12 AM

Originally posted by la4440 View Post

thanks but i already did before reading this post.

i wonder how will i get it as he's in bangalore and me in pune..

thanks anyways..

there is something called postage, mailings, courier. and all that so dont you worry pay him and you would get it and he comes to Pune now and then he generaly has business there talk to him he may be able to help you install it personally.

**desideep** · 05-02-2009, 03:14 AM

Originally posted by la4440 View Post

is the cdi so complicated btw,like it just has a transformer,rectifier and capacitor etc..

replacing the capacitor with a greater value one wont work??

people been using the RX cdi on the RD that never made difference to them so even this does now. i was using the RDD CDI on the RX100 and then converted my RX 100 to 135 5gear now still same cdi though i am going to switch to the OEM cdi to check whats the difference. cause with the RX 100 i felt less smoke, better fuel effifiency, better revs, and above all improvement in level of viberations.

**la4440** · 05-02-2009, 02:17 PM

Originally posted by desideep View Post

there is something called postage, mailings, courier. and all that so dont you worry pay him and you would get it and he comes to Pune now and then he generaly has business there talk to him he may be able to help you install it personally.

ya that is fine,but i am skeptical about buying it this way,what if some problem occurs?have had a bad online experience in the past cuz..thats why prefer buying it from a shop directly..if he keeps visiting pune,then thats wonderful.thanks for the info..

**psycho 98** · 05-02-2009, 07:06 PM

Register yourself on rddreams and post your queries there, you will get some pretty good answers there

...

**la4440** · 05-02-2009, 09:34 PM

fine ill do that..but no one has yet told me about a ready made chamber..

should i go for it or no? i want the mid range one.is it worth the cash? and how much should it cost?

**torqu3e** · 05-03-2009, 10:26 PM

Ok enough going on here.

First off, LA4440 does your id refer to the Linear Amplifier IC, which makes 6W x 2. If yes, try a LM3886.

1. RDD CDI Cost = Rs. 2800 all inclusive shipped to wherever in India.
2. It has warranty only on manufacturing defects, and I haven't seen one unit fail till date. If we find that it was a user fault that caused it to malfunction. No warranty.
3. I do keep coming to pune every now and then, but I won't take responsibility for the install.
4. Changing capacitor in a CDI, try opening a stock RX CDI. Its epoxied. Only changing capacitor will do zilch for you.

About a scam or anything happening by you paying me money, and me not sending the CDI, there are enough guys here itself who can vouch for legitimacy.

**la4440** · 05-03-2009, 11:41 PM

Originally posted by torqu3e View Post

Ok enough going on here.

First off, LA4440 does your id refer to the Linear Amplifier IC, which makes 6W x 2. If yes, try a LM3886.

1. RDD CDI Cost = Rs. 2800 all inclusive shipped to wherever in India.
2. It has warranty only on manufacturing defects, and I haven't seen one unit fail till date. If we find that it was a user fault that caused it to malfunction. No warranty.
3. I do keep coming to pune every now and then, but I won't take responsibility for the install.
4. Changing capacitor in a CDI, try opening a stock RX CDI. Its epoxied. Only changing capacitor will do zilch for you.

About a scam or anything happening by you paying me money, and me not sending the CDI, there are enough guys here itself who can vouch for legitimacy.

you actually knew that?? thats really impressive..yes its the same ic,used in a 100w stereo deck amplifier i assembled years years back..
thanks for the alternative..

well i just joined rdd,searching for any other changes required to be made after the cdi instal.

well if your coming to pune,can it save me the shipping charges?

its epoxied! oops!! me aint touching that,cut my hand once trying to open an amplifer setup..

well do you know anant by any chance? own a thunderbird,modifies engines,into motocross and all..
he's in bangalore only..he's the one who actually suggests me the mods i need to get done.n i trust him blindly.

ya i do trust you,but somewhere i read on orkut people talking about getting conned.thats why i asked..its natural

looking 4wrd to get one soon then..

**la4440** · 05-05-2009, 05:02 PM

well ill be hopefull be getting my cdi soon..thanx psycho for making me go for the right thing rather than shi** proton chambers..

problem is you need to advance the timing by 4 degrees after cdi install,can some one please expalin as how to do it? is it easy?

secondly uni there are foam sheets available as well as cylindrical ones,which one should i get?

i already have k&n intalled,there are uni wrap arounds for k&n,are they good? should i buy them rather?

**psycho 98** · 05-05-2009, 10:49 PM

Originally posted by la4440 View Post

thanx psycho for making me go for the right thing rather than shi** proton chambers..

Originally posted by la4440 View Post

problem is you need to advance the timing by 4 degrees after cdi install,can some one please expalin as how to do it? is it easy?

Here you go :

1) Remove the left engine cover.
2) Remove the magnet with a 19 inch ring spanner.
3) After removing the magnet you will see a base plate.
4) Remove the base plate using a star screwdriver.
5) The mounts what you see on the baseplate is stock, take a vernier measure 4mm from the stock holes clockwise, and mark it with a marker.
6) Drill holes now where you have marked.
7) Fix it across now, by doing this you are now +4 advance than the stock timing.
8) Don't over tighten the base plate, chances of cracking the plate are high.

Caution : Any body reading this please don't do this with a stock cdi chances of holeing your piston is high.

Originally posted by la4440 View Post

secondly uni there are foam sheets available as well as cylindrical ones,which one should i get?

You should get a cylindrical one, i would rather suggest get it from RDD.

Originally posted by la4440 View Post

i already have k&n intalled,there are uni wrap arounds for k&n,are they good? should i buy them rather?

No please stay away K&N has an negative impluse which is not suited for 2 strokes, don't bang your head so much get a uni and be happy.

**la4440** · 05-06-2009, 11:50 AM

timing i will surely do that,lets see how it goes..btw how much accuracy is required?
will a small error cause drastic changes?

UNI filter,well whole night i was searching for one..some sites have them,but then they dont ship to india,some requirerd credit card and some the cost was well above $40 including shipping..i prefer paying through paypal,even tried ebay..

what i am thinking,is take 2 rx100 stock filters,wrap them around a spring say 3" x 5" and attach it..

will it work?

as far as the k&n wrap around is concerned,ya even i was thinking about that,basic aim of getting uni is to remove the back wave for my 2 stroke..

contacted mr.chinoy..
neither uni nor cdi are in stcok!!

**la4440** · 05-08-2009, 11:18 PM

ok i tried the rx stock filter..i though ill be able to separat the foam and bristled layer,but its kinda glued..

so i thoguh chuck it,might as well order my UNI..

so ordered yesterday..lets see how it works out..hopefully rdd cdi will be avaialabe too by then and will have both of them installed at more or less the same time..cant wait!!

**torqu3e** · 05-11-2009, 10:03 PM

You ordered the UNI yourself, how nice? What model what size? Do you think it will fit on your carb? Where will you get jets to jet it?

Intriguing questions right?, Thats why RDD gives its own filter kits, which come with the correct filter and the right jets for the same.

Enjoy jetting your bike.

P.S. I have broken my head for 1 week on psycho's bike to jet it. Its still not perfect.

**psycho 98** · 05-11-2009, 10:16 PM

Originally posted by torqu3e View Post

P.S. I have broken my head for 1 week on psycho's bike to jet it. Its still not perfect.

Atleast today was ok managed to hit a three figure mark on the sigma with my fat a$$

.. thank you sir.

**la4440** · 05-12-2009, 02:57 AM

Originally posted by torqu3e View Post

You ordered the UNI yourself, how nice? What model what size? Do you think it will fit on your carb? Where will you get jets to jet it?

Intriguing questions right?, Thats why RDD gives its own filter kits, which come with the correct filter and the right jets for the same.

Enjoy jetting your bike.

P.S. I have broken my head for 1 week on psycho's bike to jet it. Its still not perfect.

Uni 2-Stage Angle POD with 2.75" id,6" length
dont exactly remembe the model no. some up6.fitting wont be a problem,ill manage.
rx jet costs 40 bucks.i already have 2 bored jets for it.will try to get the right ratio.
well if a pro like you took a week,ill prolly take a month
but the satisfaction of doin it myself will overcome the time delay in getting it right.

question: for 1800rs what all does the rdd filter kit inlcude? filter oil as well? and what size jets you provide if you could pls disclose? will help me in getting straight to the right size..

the kit has the right jet,right filter for the same,then why is it taking so much time for psycho's bike? WHEN WILL THE CDI BE AVAILABLE? I AM STILL WAITING..

**psycho 98** · 05-12-2009, 12:06 PM

Originally posted by la4440 View Post

Why is it taking so much time for psycho's bike!!

Good question, go through the link which is provided in my signature.

My bike has these mods :

1) Rz reed valves.
2) Street porting.
3) Rdd cdi digi 5.
4) Uni pod filters.

I am running on +6/+7 advance timing on the bike, Was using a VM-26 till date bike was still runing lean with 240 main jets

this is with the stock silencer not chamber, later we have upgraded to VM-28 and the bike's jetting is almost 95% complete now i clocked 100.97 (with stock siliencer) on the sigma where my weight being 90kgs and no weight reduction being done on the bike, we have to go little leaner now, i hope you are clear now

..

Announcement

rx100 modifications

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment