Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us

Axor
Magazine
Castrol Power 1

Stop braking before you start turning.

Our Partner

Announcement

Collapse
No announcement yet.

FZ v2 front disc problem

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    FZ v2 front disc problem

    Hello senior xBhpians !

    I am an owner of FZ v2 and I know all the basic things about the FZ.
    Recently I had to change my front disc pad in scheduled maintenance so I changed the disc pad correctly.
    But the front wheel is not rotating freely after changing the pads. Whereas previously, the wheel was free.
    I have opened up the caliper and pistons and all are ok as I have greased them and cleaned them properly. Pistons are moving freely.
    My senior says it is normal for few days for wheel to resist and after sometimes it will work freely.
    So I want to know is it true or do I need to do something else. And also, I want to know what causes the disc to not move freely.
    It would be very helpful for me.

    Thanks and Regards.
    Last edited by xBhp; 04-05-2019, 02:19 PM.
    Tags: None
  • #2
    Re: FZ v2 front disc problem

    Thread approved.
    Usually, with the new disc pads, some noise is common and it goes away when the disc pads set in. The phenomenon of the wheel not moving freely should not happen, ideally that is.
    Last edited by xBhp; 04-05-2019, 02:25 PM.

    Comment

    • #3
      Re: FZ v2 front disc problem

      Originally posted by xBhp View Post
      Thread approved.
      Usually, with the new disc pads, some noise is common and it goes away when the disc pads set in. The phenomenon of the wheel not moving freely should not happen, ideally that is.
      yes i also thought same... and i think fz front wheel is not free like other bikes or what

      Comment

      • #4
        Re: FZ v2 front disc problem

        its true,disk pad take some time to set in ,new pads will always grind against the rotor.

        Comment

        • #5
          Re: FZ v2 front disc problem

          Originally posted by Om1234 View Post
          its true,disk pad take some time to set in ,new pads will always grind against the rotor.
          yeah i did came up with the conclusion
          thanks for making it crystal clear

          Comment

          Previous template Next
          Working...
          X
          © xBhp.com 2026. All rights reserved.
          Designed by xBhp